My N5110 recently stopped charging the battery, usually people get plugged in not charging issue but my issue is different. I have checked the charger and the battery on other n5110, and its working fine.
Bios detect the charger wattage but when I go to diagnostic mode by pressing f12 I see the error charger is not detected but it also show the correct wattage of charger.
The processor cannot achieve full speed, it's always stuck at 0.76 Mhz,
I figured out a way to solve this problem by using throttlestop software. When I disable BD PROCHOT it starts to work at normal speeds.
Bluetooth stopped working and I was getting USB not recognized error flashing constantly. So I disabled the USB hub and now I'm on bluetooth dongle.
What could be the issue, I checked the schematics and it has BQ24745 charging chip but I feel the chip is fine because in windows it says plugged in charging.
I checked all the other USB ports, HDMI, and VGA, everything else seems to be working just fine.
Need help!!
Bios detect the charger wattage but when I go to diagnostic mode by pressing f12 I see the error charger is not detected but it also show the correct wattage of charger.
The processor cannot achieve full speed, it's always stuck at 0.76 Mhz,
I figured out a way to solve this problem by using throttlestop software. When I disable BD PROCHOT it starts to work at normal speeds.
Bluetooth stopped working and I was getting USB not recognized error flashing constantly. So I disabled the USB hub and now I'm on bluetooth dongle.
What could be the issue, I checked the schematics and it has BQ24745 charging chip but I feel the chip is fine because in windows it says plugged in charging.
I checked all the other USB ports, HDMI, and VGA, everything else seems to be working just fine.
Need help!!
Comment