aus K54L motherboard HM65 GET HOT when DC adapter in inserted

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • highpulse
    i hate HP
    • May 2013
    • 1488
    • portugal

    #1

    aus K54L motherboard HM65 GET HOT when DC adapter in inserted

    Well thats it guys , got this asus i received by outher store complaining that it dont turn on .. cheked the machine and once i insert the dc jack , the HM65 start to get hot like hell .. i looked wiselly and found a few issues one was that someone flashsed the bios and there is a resistor of 4 legs that was out of place (near ROM) i puted in the place , but still having this issue .

    there is 3.3 volts and 5 volts working ok .

    the only thing i notice is that the coil right near the pch gives me a value of 3 ohm (kind short ) when i lifted the pch thinking it could be damaged this coils with the pch lifted gives me 17 k ... i replace pch and does exxactly same symptom .. any clues ?
    Last edited by highpulse; 10-01-2014, 05:49 AM.
  • highpulse
    i hate HP
    • May 2013
    • 1488
    • portugal

    #2
    Re: aus K54L motherboard HM65 GET HOT when DC adapter in inserted

    anyone have this board view or schematic ??
    thk in advance

    Comment

    Related Topics

    Collapse

    • glovecaps
      Asus ROG Strix Scar G533qm with a G733qm Motherboard, can I modify the Bios to accept G533 Bios
      by glovecaps
      Hello,

      I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.

      My question is, can I update the Bios on this G733 motherboard to a G533 Bios.

      The reason for wanting to do this is that the keyboard isn't working as it should, and I think this...
      11-25-2024, 04:23 PM
    • Docus
      Legion Y540 17irh motherboard issue ( need help to know how to diagnose my motherboard)
      by Docus
      Hi everyone 😀,

      I'm here today to ask for help with repairing the motherboard of a Lenovo Legion Y540 17IRH.

      To give you some context, I'm passionate about computer repair so much so that I've invested in a lot of tools and started practicing on dead and old hardware. I've been learning how to solder and desolder components, mostly focusing on phone repairs.

      Recently, I bought a broken Lenovo Legion Y540 17IRH for just €150, and there are two main reasons why I made this purchase:
      1. I already own the exact same model, but its plastic chassis is badly damaged.
      ...
      06-10-2025, 04:24 PM
    • Archimedes
      HP Envy 17-3290NR 3D Blank Screen - motherboard Louis V1.1 6050A2489901
      by Archimedes
      Subject is a blank screen issue in HP Envy 17-3290NR 3D version laptop with motherboard Louis V1.1 6050A2489901 MB-A02. Production year is 2012. This one is a 2nd hand motherboard which I could use it for few months only. Suddenly no output from the internal display and also no signal from HDMI port then Windows out of order after few boots.

      Caps lock working normally and no HP's caps-lock warning blinks. Making a hard reset and replacing the RAM sticks or using different slots didn't help.

      Fans are spinning. Blindly could install windows11 and got the device manager...
      07-30-2024, 05:14 PM
    • momaka
      ASUS P5GC-MX motherboard recap
      by momaka
      Here’s another motherboard that needed a full recap: an ASUS P5GC-MX.
      This one was gifted to me some years ago by user Pentium 4, along with a few other goodies. It actually came in working order with no bulging or leaking caps. However, I noted there were United Chemicon KZG caps everywhere on the motherboard. The CPU VRM output (CPU V_core) was the only exception: it had only 2x KZG. The rest was 6x UCC TMV 4V 680 uF caps… which aren’t any good news either.

      So here is what the motherboard looked like with its original caps:


      CPU VRM area up close…...
      01-27-2021, 11:59 PM
    • dragon3x
      After updating motherboard capacitors, what to do next (Asrock K7VT2, SOLTEK SL-75FRN2L)
      by dragon3x
      Hi, I have some 32 bits computer motherboards that need repair, as they fail to
      power on.

      Here are some examples :

      (N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
      switching supply area).
      (N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
      than 6.3 V.)

      1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
      I replaced capacitors with aluminum-polymer.
      3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA...
      03-21-2025, 02:46 PM
    • Loading...
    • No more items.
    Working...