Toshiba c660D-16L power but doesnt boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lapfix
    Badcaps Legend
    • Mar 2020
    • 2602
    • my workshop

    #21
    Re: Toshiba c660D-16L power but doesnt boot

    Originally posted by piernov
    Last message in this thread was 6 years old.

    Comment

    Related Topics

    Collapse

    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • meraklinetx
      Asus Z97-a power cycle, no boot no cpu voltage
      by meraklinetx
      Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
      05-10-2023, 06:08 AM
    • PantherDave
      Microsoft Surface Pro (5th gen) model 1796 - no power
      by PantherDave
      Hi all!

      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
      https://www.badcaps.net/forum/troubl...-hardware-devi...
      05-29-2024, 02:01 PM
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • dicky96
      Toshiba Lifebook A514 - Power light illuminates, Battery Charges but won't boot up
      by dicky96
      Hi guys
      I have this Toshiba Lifebook A514

      When I got it the battery was flat, orange Battery LED on. When you press the power button, with PSU attached, the blue LED by the button (and the one at the front of the laptop) come on, but no fans no signs of life... Nada.

      I left it overnight on the charger and the battery did charge - no more orange light and the laptop will now power on without the PSU - but still no signs of life

      If you hold the power button in, it will not power down again, you have to switch off power to the PSU

      If you do...
      05-14-2021, 05:03 AM
    • Loading...
    • No more items.
    Working...