I have a1706 820-00923-a, the smc in this board is bad (980 yfe tm4ea231) I have a new smc but the problem is how to program this smc, does anyone know about it pls help
-
-
No publicly available means to program a blank SMC. Any replacements have to come from a donor board.
You can use some SMC's from other models and reprogram using Muerto's SMCtool, but the board has to be able to boot to do that. -
BTW, SMCtool is deprecated and now replaced with SMCFT. This model is not supported currently. It may be that he doesn't have a board to test with.
Apple use different naming schemes for boards. 820-00923 --> Macbook Pro 14,2 --> Mac-CAD6701F7CEA0921
This is not currently listed in his tool, so ask if he can add it.
Maybe contact him in this thread:
https://www.badcaps.net/forum/troubl...efi-toolkit​Comment
-
hello everyone, I have a ch431a programmer, I want to program an electric bike microcontroller. I watched a video on youtube. It's programming on paython with TTL connection, but I don't know if the microprocessor is the same. I have a xc836 microcontroller on my card, on which feet I can program this controller, if anyone can help, it's very helpful. i'm glad. -
Hi guys, I've a problem with HP ProOne.
The PC have a black screen problem, I've flash one bios that I found on bad caps e the PC now is power on, but enter in manufacturing program mode.
I've try to found the missing information in the old bios, but i don't found it.
I only found serial number in the back of the PC
.
How can i found the missing information and turn off the manufacturing program mode?
Thanks to everyone for the help... -
Hi everyone. Got MacBook Pro 13 2016 A1706 w/ Touchbar (820-00239) with strange symptoms. It draws 20V/1A from the charger (w/o battery connected), CPU gets reasonably hot, the fans start spinning (when the CPU reaches some temp threshold), but no image, no sound, no backlight, no touchpad clicks, no keyboard backlight (also no response to CapsLock press), no image on external display (through working dongle and HDMI). The laptop chargers the battery with no issues. Also the laptop reacts to power button like it should be: it kinda "turns on" (the fans start spinning) when on battery... -
I just received my new io programmer and it works great. I'm trying to figure out how to program the kb9542 with it. the kb9542 ENE files are 160kb compared to the usual ENE files that are 128kb. how to program the thing to read 160kb instead of 128kb? -
Hi all,
I have an A1706 that was liquid damaged, the logic board turns on and works when the battery connector is not plugged in, but when the battery is plugged in, the computer is stuck on 5v @ 30-40 Mah, and USB-C meter will reboot every 5 sec or so, pressing and holding down the power button will make the USB-C meter to stop boot looping, and if you keep holding it, fan will quickly spin up and turn off.
when the battery is unplugged and plug in the charger then plug in the battery it will stay on 20V and 1.6A-2.6A but when you unplug the charger, the computer...
Comment