Can any one name this program or send an url for it
Attached Files
-
-
It would be best to search for it online using its Chinese name. It isn't easily accessible to everyone. The only way to obtain the software resources is to purchase an account from a vendor. It's expensive, and I don't recommend it. I recommend another Chinese repair software called "XZZ" instead. It can be downloaded directly from the official website and offers a free VIP trial period. However, XZZ contains fewer schematics than Repair Partner. Some schematic resources were leaked from the "XZZ" software on the BadCap forum by cracking its encrypted memory. -
That is a Chinese Software named "维修伴侣"( "Repair Patner" ) . It would be best to search for it online using its Chinese name. It isn't easily accessible to everyone. The only way to obtain the software resources is to purchase an account from a vendor. It's expensive, and I don't recommend it. I recommend another Chinese repair software called "XZZ" instead. It can be downloaded directly from the official website and offers a free VIP trial period. However, XZZ contains fewer schematics than Repair Partner. Some schematic resources were leaked from the "XZZ" software on the BadCap forum by cracking its encrypted memory.Comment
-
After hacking all Chinese programs and distributing resources for free use, access to resources of many brands will be blocked. No one will have access, not even the Chinese. HP, MSI, ASRock and some others have already blocked access, resources for newer models cannot be found even for big money. Next in line are Asus, Gigabyte, Dell, Lenovo... Improve your professional level, learn to repair without the help of schematics, in the future there will be no schematics for new models!Comment
-
Epson M3170 Monochrome inkjet printer adjustment program tool.
Hi, i want to reset a epson reset program tool needed to reset the EPSON M3170 PRINTER's Maintenance box,
anyone having it, please share
Thank you -
Hi, I'm repairing this Chinese SG2701B01-7 panel. There isn't much information about it. The original part for the panel is a CSOT CS601C regulator. I can't find anything commercial on Aliexpress; there's only the CS601 without the final 'C'. They claim it's a variant. But will it be compatible? Well, my diagnosis on this screen is a video problem; the image is practically black, although there is HDMI communication. The LED light is on (backlight), but there is no VGL, no 3.3V, and no VSS. It seems that this IC is the one controlling these voltages. The monitor worked correctly for a moment and...
-
Greetings and salutations!
I have a device that uses an N32G455RE. Unfortunately, its flash got corrupted. I have a dump of a working chip.
How can I program a specific region of the flash or the whole flash without touching the RAM, option registers, etc.?
I do not have a J-Link debugger and won't buy one, as I am not rich.
I have flashed a Nucleo board with an ST-Link to a J-Link just to find out that the ST-J-Link only supports ST chips.
What would be the cheapest and easiest option to program the Nations chip's flash without touching registers etc.?... -
Samsung NP750QGK-KG3US BIOS program error seeking help
PCB:BA41-03025A BA92-25486B
I opened the Modular Flash Image Tool-v16.50.00.1120 software and encountered the following error message. I am seeking help.
... -
CDS‑200B ultrasonic cleaner - AKA James Ultra 7050 etc.
There are many versions of cheap Chinese ultrasonic cleaners, and a fair few share this design, with a removable tank with handle. There are also fixed tank versions which look to use the same basic layout and presumably the same PCBs.
I picked one up "spares or repair" on ebay, and the cleaner was dead, but the fuse wasn't blown.
A quick diode check revealed D7 was shorted. D7 is a 12V 1/2 Watt Zener. I had one in my stash, so this was about as close to a "five minute repair" as...06-23-2025, 03:22 AM
Comment