Hi all , I have A1466 emc 3178 bios chip 2017 model..i wanted clean me..removed the chip/and then lost it ..so i dont have bios file.
Can anyone please give me a bios file with my serial number and cleanme
Serial number is FVFW8P6BJ1WK
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
A2779 - Board Number 820-02841 Boardview and schemetic
I Hav one M2 Pro water damaged , Need Schemetic and boardview for the same. So i can repair it
-
Need boardview/schematic for iPad A2602
Need boardview/schematic for iPad 9th Gen /model no A2602
if anyone can help then it will be great!!
-
Re: Macbook air a1466 emc 3178
Thank you for your help,But problem wasnt the bios or software/it was hardware/
i changed few ic and then the problem was gone...
Leave a comment:
-
Re: Macbook air a1466 emc 3178
still the same...though now its waking up from sleep but its still taking around 3-4 minutes for display to come...
Leave a comment:
-
-
Re: Macbook air a1466 emc 3178
i need clean me of this particular bios/its from A1466/2017 model/Board number 820-00165
Serial No - FVFZC865J1WK
Problem - Slow boot and MACBOOK doesnt wake up from sleep...
Leave a comment:
-
Re: Apple Macbook Air 13 A1466( 820-00165-a) bios
thank you..but my work was done already...
now is it possible to put in this cleanme another serial number
FVFV41U9J1WK
and if you can guide me to cleanme the bios or edit the serial number in the bios..then it will be really helpful and i will not have to bother anyone here again and again..
Leave a comment:
-
Re: Apple Macbook Air 13 A1466( 820-00165-a) bios
please provide cleanme for this bios..this is going slow and not opening from sleep......
Leave a comment:
-
Re: A2141 Boot Loop Issue
Facing the exact same problem..an one found the solution yet?...
Leave a comment:
-
Re: A2141 (2019 16" MB Pro) Strange macOS install issues. NAND? WIFI? FIRMWARE?
Did you find any solution.??
i m somehow struggling with something like this...
macOS tries to install..and at some point stops or with high speed fan it macbook shuts down and restart..and then it goes to loop..
Leave a comment:
-
Re: TPS51980B Vs TPS51980A !!!URGENT!!!
so in short i cant use TPS51980A instead of TPS51980B in A2141!!
thanks for your detail reply...
Leave a comment:
-
-
TPS51980B Vs TPS51980A !!!URGENT!!!
can someone please tell me that can i use tps51980A or tps51980 insted of tps51980B??
in schematics and in pdf ...they are both showing same signal and voltages..
actually i am working on A2141, 16 inch macbook pro and i am suspecting TPS51980B faulty..but i dont have same part handy...but i have TPS51980A ...
so can i use it?
-
Re: question about TPS51980B at 820-01987
can someone please tell me that can i use tps51980A or tps51980 insted of tps51980B??
Leave a comment:
-
Re: MacBook Pro Touch ID Question Thread
if u just changed the screen then there shouldnt be any problem with touch id...because touch id isnt binded with the screen...
maybe while changing the board and touch id from one mac to another...you must have messed something up..
Leave a comment:
-
Re: A1466 not booting with wifi card
Yes.. It was from that laptop only.. Though as i said..i swapped 2-3 cards from different same model laptop.. And checked...
Though i don't know now..i replaced lots of parts which was related to WiFi section..
Not something else is wrong.. Now it's not booting even without the WiFi...
Fan spins then for 5/6 seconds.. Then stops.. Again starts.. But then this time fan keeps spinning.. But no display...
I'll sit again tomorrow and check it again.. And bring it back to the old condition..
Leave a comment:
-
Re: A1466 not booting with wifi card
But I don't really understand one thing . That if some part or track is damaged or shorted.. Then how come board is booting after the card is removed.. and card is also fine because it's working in another laptop...
Leave a comment:
No activity results to display
Show More
Leave a comment: