Hi ive got 2 cq61 laptops but only one screen which im having trouble with both of the mother boards one when plugged in just has a white screen and the other when the screens plugged in works but has no backlight am i right in thinking that i need a new inverter?
Announcement
Collapse
No announcement yet.
compaq cq61 not working
Collapse
X
-
Re: compaq cq61 not working
Originally posted by azza1234 View PostHi ive got 2 cq61 laptops but only one screen which im having trouble with both of the mother boards one when plugged in just has a white screen and the other when the screens plugged in works but has no backlight am i right in thinking that i need a new inverter?
-
Re: compaq cq61 not working
Originally posted by azza1234 View PostHi ive got 2 cq61 laptops but only one screen which im having trouble with both of the mother boards one when plugged in just has a white screen and the other when the screens plugged in works but has no backlight am i right in thinking that i need a new inverter?
did you switch them ? white one without backlight?Just cook it! It's already broken.
Comment
-
Re: compaq cq61 not working
Originally posted by dj_ricoh View Postthe white screen its bad?
did you switch them ? white one without backlight?
Comment
-
Re: compaq cq61 not working
Originally posted by trebo View Posttry swapping the inverters, that should give you backlight on the one that displaysLast edited by azza1234; 05-20-2014, 03:51 PM.
Comment
-
Re: compaq cq61 not working
Hi my friend reballed both of the motherboards and still have no backlight through motherboards I used in car dvd screen inverter and the screen lights up so its not the backlight bulb so im quite stuck is there a circuit on the motherboard that powers the inverter? I get 18v on inverter plug
Comment
-
Re: compaq cq61 not working
Right I tried to measure voltages on cn1 and managed to blow up the mother board lol so have to try and fix the other one (one with picture no backlight) on the inverter the voltages are as follows
1-18.64v
2-0.0v
3-3.26v
4-0.0v
Im sure pin 4 is ground and pin 1 is the right voltage but what should 2 and 3 be?
Comment
Comment