Hi everyone , I need your help with this board and it's giving me a hard time . 3 long and 2 shorts base on HP site it's a MEMORY ERROR , tried replacing RAM it's still the same. RAM VOLTAGE has 1.2V i think it has a complete voltage a 3.3v and there's also ah 2v , tried checking pins if there any damage or unsoldered and everythings good , now I don't what should I do next. Also tried reflashing and programming the bios and still the same, hopefully there's someone who can help me with this since im having like 4 laptop with the same error.
-
-
2.5V VPP supply is present? -
Yes it is thank you , i found out that a resistor isn't working as intended due to corrosion, funny thing is I checked everything first and the corrosion is too far from the ram socket, I just resoldered it and everything works now.Comment
-
Which resistor precisely? What is the voltage on both pins?Comment
-
rev-1.0
input short remove then caps lock 5 long 3 short no output how to solve this problem -
Hello guys,
As per title says I have a Envy 15-FH0501sa , Ryzen 5, 16 Gb version.
Motherboard number is JPB51 LA-M798P rev.1.0
SN CND3362R3S
The laptop is getting power and funs stop spinning after few swcconds. It was liquid damaged so we get it to turn on. However 3 long and 2 shor Caps lock lights showing. Power button turns the laptop on but not off.Battery is charging.
Please help and advice. I attachet the bios dumb in case the bios is the problem.
Many thanks.... -
I have a "HP Pavilion x360 - 14-ba104na" in for repair. The caps lock flash 3 long and 5 short.
HP says this error means:
The red light blinks three times, and then five, short white light blinks (3 long red, 5 short white)
This condition indicates that the computer does not detect the processor (CPU).
Does this mean the CPU is dead or is there another cause for this fault? -
Just picked up this sharp tv not too long ago and it started not wanting to start the other day, giving me the notorious 2 long-5 short blink pattern indicating a power issue. I was able to force start it a handful of times (once the tv has fired up it has no issue running for 5+ hours). But now as of yesterday, no matter what I try to do button combination wise, I just receive the same blinking code.
So I busted into it and have done the following:
-Removed the power board and inspected for any bad caps, burn spots etc. Do not see any instances of such ... -
LA-G07EP rev 2.0 i3 7th gen. light blinking 5 long 3 short
Comment