iPad 8 Wi-Fi 820-02113

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PITERPENY
    Badcaps Veteran
    • Jul 2023
    • 455
    • Ukraine

    #1

    iPad 8 Wi-Fi 820-02113

    some kind of nightmare. Help me figure it out! I'll attach a video. Water spill. I cleaned everything. I changed the display and sensor but it didn't help.
    https://youtube.com/shorts/v590x4vJe...6OoxL2-UummLhT
    https://youtube.com/shorts/v590x4vJefY?si=uY6OoxL2-UummLhT
    Last edited by PITERPENY; 10-01-2024, 01:50 PM.

Related Topics

Collapse

  • GeirAndersen
    iPad .pcb file collection
    by GeirAndersen
    I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
    Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

    IPAD COLLECTION 1
    +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
    +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
    +---iPad mini3 820-00008(A1599) 820-00002(A1600)
    +---iPad mini4 820-00180(A1538) 820-00177(A1550)
    +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
    +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
    12-09-2024, 09:28 AM
  • Document Archive
    Apple iPad Mini WIFI & 4G Schematic
    by Document Archive
    Apple iPad Mini WIFI & 4G Schematic...
    10-21-2024, 03:47 AM
  • sam_sam_sam
    20 year old Kenmore refrigerator ice maker bad water valve coil took a crap
    by sam_sam_sam
    I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

    At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

    Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
    04-09-2023, 08:04 PM
  • howardc64
    M557-G0 no WiFi/Bt no WIFIVendor file?
    by howardc64
    Thanks to Diah, got M557-G0 LCD panel buffer board repaired and running ( link ) Next challenge is no WiFi/Bt despite module on the main board and getting 3.3v supply (3.45v measured)
    • TV Menu shows Network Access Point option (enet unplugged) but menu can't select that entry
    • Service Menu shows many Bt/Wifi info missing
    • Vizio app shows no WIFIVendor file
    Prior owner used enet and said turned off wifi somehow. It seems system config info for wifi might be missing. Anyone experienced this before?
    • Tried countless enet unplug (user manual said need to unplug enet to get to wifi menu), factory
    ...
    10-15-2024, 01:12 PM
  • ugamazing
    820-00850 & 820-01949, No WiFi *In Recovery*
    by ugamazing
    I've got two boards with the exact same issue, and it's confusing the hell out of me. In short:

    1. Both boards behave *exactly* the same; they will show WiFi networks to connect to, and will boot fully to Internet Recovery, but they each show zero available WiFi networks once booted to Internet Recovery. I also cannot switch WiFi "off", as in, the toggle will not move.

    2. Both boards will erase perfectly fine using the "erase mac" function; I can wipe them with disk utility, but if I try to install MacOS from Internet Recovery, it says to connect...
    01-25-2023, 05:39 PM
  • Loading...
  • No more items.
Working...