Clevo P775TM ec flashing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • f-bone
    Senior Member
    • May 2013
    • 96
    • Greece

    #1

    Clevo P775TM ec flashing

    hi guys,

    I got this gaming Clevo here (i9-9900k, rtx2080) of uknown brand (there are a few companies using the same mobo) which has 2x IT8587e. I have the bios and ec files for all chips but I have no clue how to flash the two ECs... I got a Vertyanov v2 and RT809F+PEB1.

    Any help to do this without removing the chips would be great!

    thank you!
  • khaahk
    Badcaps Veteran
    • Dec 2013
    • 766
    • Estonia

    #2
    With Vertyanov you choose the mainboard from the list and connect flex to the correct keyboard interface. (usually specified in ite.txt on the line with mainboard model).

    Comment

    Related Topics

    Collapse

    • Bingers
      Looking for Clevo P775TM Boardview
      by Bingers
      Hello I have an Origin PC version of the Clevo P775TM. Looking for the boardview to help me find some components related to the temperature sensing. Thanks in advance!

      Already have the schematics....
      07-31-2024, 05:20 PM
    • STKR123
      Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
      by STKR123
      As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
      I wonder if re-flashing the BIOS might be of any use here.

      As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

      There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
      11-03-2024, 06:58 AM
    • Günter Schuch
      searching for Schematics & Boardview for Clevo P641HK1
      by Günter Schuch
      hallo leute ich habe ein problem mit meinem laptop der marke Schenker XMG P407 und zwar ist mir anscheinend der Grafikchip gtx 1050ti der direkt auf dem motherboard verlötet ist kaputt gegangen sie ist im Gerätemanager nicht mehr aufgelistet. deshalb hoffe ich hier unterlagen für das gerät zu finden. soweit ich herausgefunden habe wird die Platine die bei der firma Schenker verbaut wird von Clevo gefertigt und zwar mit der bezeichnung "Clevo P641HK1" ich hoffe auf eure hilfe und bedanke mich.

      Hello folks I have a problem with my laptop of the Schenker XMG P407 brand...
      05-14-2025, 06:34 AM
    • learnmore
      Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
      by learnmore
      Hello Community!

      CASE DETAILS

      Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

      13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

      Tried inserting firmware on USB and left it in for a few hours, but no change
      ...
      03-03-2024, 09:49 AM
    • peterwang
      CLEVO PCB:6-71-V2500-D02
      by peterwang
      Hi! I encountered a Clevo brand laptop that needed its boot LOGO modified. I found the LOGO address, but after the modification, the machine stopped displaying it. I'm puzzled. It worked normally before the 11th generation of CPUs, but it stopped working from the 12th generation onwards! The LOGO addresses are:
      166BACEC-6793-4F38-213F-DE0BEF4FEF95
      166BACEC-6793-4F38-213F-DE0BEF4FEF97
      166BACEC-6793-4F38-213F-DE0BEF4FEF99
      I have provided the BIOS and LOGO files that require LOGO modification, and I hope someone can help me.

      post moved...next time look for a thread...
      07-05-2025, 03:57 AM
    • Loading...
    • No more items.
    Working...