iPad Air 9th A2602

[bamboofuto]

Hi all,

i have a problem with dead no charging iPad 9th. i dont have xyz or boardview.
can somone help me to identify this componen as attached. i believe it is a mosfet. it gets hot when i injected voltage from battery connector on the board.

thanks in advance

[elecsoluces]

Hello,
It's a mosfet : FDMC 6686P

[bamboofuto]

already found the culprit caps..
case close..
thanks all

[Baludoki80]

What is the part IC?
the part was heated and the inscription was not visible, and not have schematic.Thank you

[elecsoluces]

Hello,

It is backlight IC : LP8566

[Baludoki80]

Hi! I have another ipad 9 this ipad broken pads and missing part,i dont know what is it,and is it possible to fix it broken pads? Thank you

[elecsoluces]

Hello,

It is a zener diode BZT52C10.

[Baludoki80]

Thank you,the diode solder joint is missing,how can I connect it,with jumper?

[Paljas007]

Hey guys I got the same iPad and also no luck finding schematics. Anyone can help me out with which components these are? It seems like 2 capacitors but not sure and the ipad doesn't charge (0.005 amps)
I replaced the charging IC already
any help appreciated!