This mosfet does not have any connection to ground, it can't be the reason of the short.
Check if it is a vcc main short or vcc batt short....
elecsoluces
Senior Member
Last Activity: 05-28-2025, 09:36 AM
Joined: 05-06-2020
Location: AIX EN PROVENCE
-
Hello,
Backlight issue is a common problem on all ipad pro 12"9.
It's a motherboard problem, check around fpc lcd you will find burnt ferrite bead.
You can post a picture if you want help to locate it.
Experience is needed to replace this component....Leave a comment:
-
thanksLeave a comment:
-
Hello,
Acer aspire 3 no boot
Motherboard : EH7L1 LA-H782P Rev 1A
S/N : NXHEEEF020A01510A883400
Can someone check my bios....Leave a comment:
-
S/N # 5CD91152CXLeave a comment:
-
Hello,
I'm working on a HP ProBook G6 that is no turning on.
Motherboard : DA08IMB8E0 REV E
Can someone check my bios maybe corrupted data.
Thanks​...Leave a comment:
-
You can flash android mobile with odin.
You can find samsung firmware on sammobileLeave a comment:
-
Leave a comment:
-
Hello,
It is BAS316 100V/250mA/SOD 323Leave a comment:
-
Hello,
It is backlight IC : LP8566...Leave a comment:
-
It looks like a detroyed resistorLeave a comment:
-
You have first change the PMIC, it's U8100?
I don't think it is the right way to troubleshoot this board, may be you're wasting your time.Leave a comment:
-
Hello,
It's a mosfet : FDMC 6686PLeave a comment:
-
Re: iPad 6 A1954 SWAP
If your Ipad has a sim card reader you need to transfer baseband eeprom too.Leave a comment:
-
Re: iPad 6 A1954 SWAP
Hello,
You forget CPU eeprom U1101.
I don't think you need to swap U8100.Leave a comment:
-
Re: Nintendo Switch lite charging chip heats up and does not short circuit
Hello,
BQ24193 is heating, it's normal behaviour. What is the temperature?
Charge current seems normal, are you sure it is not a display problem?
Check LCD and LCD connector.Leave a comment:
-
Re: Huawei P20 lite
You have several microphone on phone.
The microphone for call is near usb-c connector.
You should replace the card with usb-c and jack connector.Leave a comment:
-
Re: troubleshooting microsoft surface pro 4 no power no led charge light
Remove all power source (battery and charger).
Use your multimeter in resistance mode and measure +3V_EC.
A short is very low resistance close to 0 OhmLeave a comment:
-
Re: troubleshooting microsoft surface pro 4 no power no led charge light
Hello,
Check resistance to ground on +3V_EC.
If you have a short on +3V_EC a common issue is bad U3601Leave a comment:
-
Re: Help Unowhy Y13 Remove battery connector
For sure there is no lock, look at this video:
[url]https://www.youtube.com/watch?v=wQ-q3Ct9go4[/url]Re: Help Unowhy Y13 Remove battery c...q3Ct9go4[/url]Leave a comment:
No activity results to display
Leave a comment: