Is there an alternate way to power up a CCFL Inverter?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • orientalsniper
    Badcaps Veteran
    • Apr 2013
    • 459
    • USA

    #1

    Is there an alternate way to power up a CCFL Inverter?

    There's this laptop I'm working with, LCD screen is good, tested with 2 inverters of same model, but sometimes the backlight won't work.

    I do have an inverter/ccfl tester, it can power the CCFL in the screen and works fine. I think there's a power issue in the laptop when it feeds the inverter. Inverter gets hot too.
  • alihomee
    Badcaps Legend
    • Dec 2012
    • 1574
    • malaysia

    #2
    Re: Is there an alternate way to power up a CCFL Inverter?

    if your inverter gets hot while connected to the lcd cable that means your inverter is shorted

    Comment

    • spidey
      climbs
      • Dec 2012
      • 644
      • Cyprus

      #3
      Re: Is there an alternate way to power up a CCFL Inverter?

      buy an universal inverter.

      Comment

      • orientalsniper
        Badcaps Veteran
        • Apr 2013
        • 459
        • USA

        #4
        Re: Is there an alternate way to power up a CCFL Inverter?

        @alihomee: It happens with the other inverter too.

        @spidey: Would this http://www.ebay.com/itm/1pc-2-Lamp-B...item2ec112a1cb work on all kinds of laptop lcd?
        Last edited by orientalsniper; 08-24-2013, 10:49 AM.

        Comment

        • spidey
          climbs
          • Dec 2012
          • 644
          • Cyprus

          #5
          Re: Is there an alternate way to power up a CCFL Inverter?

          no it is not for laptop lcd.

          Comment

          Related Topics

          Collapse

          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • PantherDave
            Microsoft Surface Pro (5th gen) model 1796 - no power
            by PantherDave
            Hi all!

            I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

            I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
            https://www.badcaps.net/forum/troubl...-hardware-devi...
            05-29-2024, 02:01 PM
          • GLISIT
            Asus Probook P5440UF-XB74 power issue
            by GLISIT
            Hi all,

            TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


            I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

            A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
            01-16-2025, 02:29 PM
          • ttmi100x
            HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
            by ttmi100x
            Greetings everyone,


            I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


            The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
            Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

            Upon closer inspection...
            07-31-2024, 06:36 PM
          • sam_sam_sam
            Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
            by sam_sam_sam
            I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

            One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
            03-31-2024, 02:12 PM
          • Loading...
          • No more items.
          Working...