pressario v6500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jpatrice22
    Member
    • Oct 2011
    • 39
    #1

    pressario v6500

    hi everybody,

    i've an issue with a pressario v6500,when i press power button, it's turn on and stop immediately(nearly 2 seconds).how to fix this problem?

    Need your help guys!! thanks in advance.....
    Tags: None
    • jpatrice22
      Member
      • Oct 2011
      • 39
      #2
      Re: pressario v6500

      hi, problem was fixed by reflowing northbridge......

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Woodsworth
          PS3 CECHC03 60GB YLOD Troubleshooting
          by Woodsworth
          I have a post on psx-place for this but thought I'd try here as well in case anyone has experience or the schematics or any kind of help. Here's the original post from psx-place:
          START
          Hi, so I bought a YLOD Fat PS3 as I wanted a repair project and thought it would be a good way to get experience. I was able to solder to the RX, TX and Diag pads on the COK-002 motherboard and was able to get external access and retrieved the codes. I haven't powered it on beforehand so these should be the last ones. I did try to get internal access immediately after but kept getting scopen response...
          03-19-2024, 07:58 AM
        • x_orange90_x
          Seven Leagues Slot Machine stop button issues
          by x_orange90_x
          I don't know if anyone here has experience with Japanese slot (pachislo) machines, but I sure hope so. I bought this machine last week in semi-working order. It would play and the reels would spin, but the stop buttons would not stop them at all. I found that the high-frequency filtering tantalum capacitor was bad on the reel stop board, along with the fuse being blown. I replaced the fuse and removed the capacitor. I haven't replaced the cap yet because I didn't have one on hand, but it's not necessary for the operation of the machine.

          The issue now is the Stop buttons are intermittently...
          02-12-2025, 10:01 AM
        • smic717394
          iphone XS turns off when press on screen.
          by smic717394
          Hi,

          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
          07-25-2024, 10:16 AM
        • BMCappelletti
          Lenovo Thinkpad E14 Gen3 stuck on "To interrupt normal startup, press Enter" screen
          by BMCappelletti
          Hi everyone.
          Lenovo Thinkpad E14 Gen 3, stuck on the "To interrupt normal startup, press Enter" screen.
          Found a lot of people with this issue, but with no definitive answer. Some people managed to get away accessing BIOS, going to Startup and turning off "Option Key Display". For me that only removed the interrupt normal start up message, leaving only the Lenovo logo.
          Most people say hitting Enter does not work. It's true, if you wait a few seconds. But if you hit Enter right away you get the options to enter BIOS (which works), run diagnostics (goes to a...
          02-18-2025, 12:22 PM
        • ashr88
          Lenovo Thinkpad E590. Powers & displays but "BAD CRC of Security Settings in EFI variable" & Bad SVP Data, stop POST task.
          by ashr88
          Hello, I have an Lenovo Thinkpad E590.

          It displays the bios splash screen then displays the following error and turns off.

          "BAD CRC of Security Settings in EFI variable"
          &
          Bad SVP Data, stop POST task....
          1 Photo
          12-10-2024, 08:28 AM
        • Loading...
        • No more items.
        Working...