Snow on screen and no start Do I have to replace my CF53-MK2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kilog
    New Member
    • Jan 2020
    • 2
    • cameroun

    #1

    Snow on screen and no start Do I have to replace my CF53-MK2

    Hello friends,

    Last week when I tryed to start my CF53-MK2 it just stop starting
    and when it starts it displays snow and dansing and coloured lines on the sreeen as you can see in the attached video.

    Some time it may show the startup Bios screen for a 3 to 10 seconds and then immediatly starts to disply snow and coloured lines.

    I tested the RAM it is correct.
    I tried to hook the machine on a HDMI screen, nothing.
    I am not sure that the computer goes far to be able to show anything on an additional monitor.

    Please I need your advice: do I have to change my CF53 screen, or is it something bad with the motherboard.

    Best regards
    Attached Files

Related Topics

Collapse

  • Ryan.man
    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
    by Ryan.man
    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
    02-04-2025, 12:23 PM
  • benek123
    RedmiBook 15 pro 2023 Ryzen - after replace LCD screen work only in windows
    by benek123
    I replaced the screen and LCD ribbon in Redmi Book 15 Pro Ryzen 2023. After replacing, the image on the screen is only visible in Windows 11 - when the AMD drivers are loaded.

    The screen is backlit but there is no image in: bios, post, when loading windows, in linux (ubuntu boot from usb), windows 10 PE.
    When I disconnect the EDP connector from the board and connect the HDMI cable, the image is visible everywhere good, in the BIOS you can see 2/3 of the image, i.e. 1920 pixels out of 3000 pixels.
    I checked the EDID with the old screen - it is identical.

    What...
    09-24-2024, 03:28 PM
  • smic717394
    iphone XS turns off when press on screen.
    by smic717394
    Hi,

    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
    07-25-2024, 10:16 AM
  • burbutsalos
    LG 55sk8000 plb ..snow in the middle of screen but can see that picture exists there
    by burbutsalos
    Hello everyone.

    I have this TV set which has this issue. It shows a vertical bar im the middle of the screen.
    The panel has 12 cofs and the problem seems to be on the territory of the first cof on the right side.
    The tv fires up and you can see a good picture exept that vertical part where multicoloured pixels exist.
    The strange thing there is that you can see behind that snow that it shows picture but as if there are these pixels in front so you cannot see clearly.

    The effect is there even on a completely black screen.

    The screen...
    10-21-2023, 02:57 AM
  • Chrissygizmo
    Samsung UE55JU6800K half screen dark
    by Chrissygizmo
    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
    02-10-2025, 12:33 AM
  • Loading...
  • No more items.
Working...