hello, what kind of programmer should I use to reprogram the micro-EC or kbc (I think it's the same right?) in my case it is :ENE kb 9022q
Thank you
Thank you
-
Last edited by poweron; 08-16-2023, 07:09 AM. -
Re: kbc programmer
https://www.badcaps.net/forum/showthread.php?t=103526
Vertyanov SUCCESSOR , SVOD4 ,RT809H . -
Re: kbc programmer
Thank youComment
-
Re: kbc programmer
how can you see if the EC region is included in a bios...for example when in the various posts I find that the bios+EC file is published the EC part must be flashed together with the bios or separately or it must be inserted with a programmer for KBC, please excuse my ignoranceComment
-
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone... -
Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...06-17-2025, 07:17 AM
-
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
Hi everyone, does anyone use this programmer "T48 TL866II Plus High speed Universal Programmer"?
I am planning to buy a programmer for my Dell Precision 7710 to re-flash the bios....
Comment