Toshiba Protege Z30

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Inforgalaxie
    Member
    • Apr 2023
    • 37
    • Portugal
    #1

    Toshiba Protege Z30

    I have this motherboard that just work with memory on slot1, if I place the same memory on slot 2 the motherboard start but not have image on lcd.

    The ram slot pins are good... What you think?

    Thanks for help.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Byte_76
      Faulty memory slot on Tekram Slot 1 motherboard
      by Byte_76
      I have a Tekram P6PRO-A5 Rev. 1.01 which has an issue with one of the memory slots and with the floppy port.

      When a memory module is installed into the slot which is closest to the north bridge, the board will beep and won't post. The same memory module works in the two remaining slots.

      Also, the floppy drive does not work regardless of bios settings.

      Please help me to identify the possible cause of the faulty memory slot and the floppy drive port as well.

      I have examined the board under my digital microscope and did not find any broken traces....
      2 Photos
      04-12-2025, 06:58 AM
    • Roli
      Lenovo C440 CIH61S1 motherboard , wont post with 1 slot of memory
      by Roli
      Hello , i got this lenovo C440 , with moderboard CIH61S1 , the problem is that when i put 1 memory in slot 1 the system wont post , ocasionaly it works but most of the time it doesnt and when it works , it gives BSOD-s and freezez a lot , if i put memory in 2nd slot , the system will work fine , if 2 put 2 memories again system will crash /freeze /bsod / or it wont post .
      I tried changinc CPU , other memory .
      05-01-2025, 08:48 AM
    • glovecaps
      Asus ROG Strix Scar G533qm with a G733qm Motherboard, can I modify the Bios to accept G533 Bios
      by glovecaps
      Hello,

      I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.

      My question is, can I update the Bios on this G733 motherboard to a G533 Bios.

      The reason for wanting to do this is that the keyboard isn't working as it should, and I think this...
      11-25-2024, 04:23 PM
    • Docus
      Legion Y540 17irh motherboard issue ( need help to know how to diagnose my motherboard)
      by Docus
      Hi everyone 😀,

      I'm here today to ask for help with repairing the motherboard of a Lenovo Legion Y540 17IRH.

      To give you some context, I'm passionate about computer repair so much so that I've invested in a lot of tools and started practicing on dead and old hardware. I've been learning how to solder and desolder components, mostly focusing on phone repairs.

      Recently, I bought a broken Lenovo Legion Y540 17IRH for just €150, and there are two main reasons why I made this purchase:
      1. I already own the exact same model, but its plastic chassis is badly damaged.
      ...
      06-10-2025, 04:24 PM
    • Document Archive
      Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
      by Document Archive
      This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
      09-06-2024, 05:27 AM
    • Loading...
    • No more items.
    Working...