Aerogarden Ultra LED blinking or strobing grow lights repair

[Cure2]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Here are the pictures of the PC board. I replaced CD1, CD2 and CD3 (twice each). I'm wondering whether a better plan B would be to just wire in standalone 24V 6A power supply for 20 bucks.
Thank you very much.

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

I replaced the 3 caps just like the previous poster. I am a novice at soldering but it seemed pretty straightforward. Anyway, LED lights are still strobing. I must be the only one on the Internet this hasn't worked for.

post pictures of your supply. maybe we can see something...

[Cure2]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

I replaced the 3 caps just like the previous poster. I am a novice at soldering but it seemed pretty straightforward. Anyway, LED lights are still strobing. I must be the only one on the Internet this hasn't worked for.

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

I am glad this thread was able to help you out!

[dfbills]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

I had a very successful repair and the lighting array has been working flawlessly for a week now. A sincere thanks to all that pitched in to help me out.

[dfbills]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Thanks all. I've ordered my replacements. Will post back after my successful install.

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

mine had three 1500uF caps! put some larger value than the 470uF in.There is enough space in yours.

[stj]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

that's correct - make sure the diameter or pitch between the leads matches or the replacements wont fit

[dfbills]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Thanks, stg. I can't find either exact series, but these values are available from a variety of manufactures. Am I correct to assume the capacitance is measured in micro-Farads?

10 μF
50 VDC

470 μF
35 VDC

Looks like I can get Kemet Aluminum Organic Polymer replacements for $0.64.

[redwire]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Wow that's a lot of LED's. It looks like 8S white, and others are 3S red or blue+6S white. Some LED's look multi-chip so I could be wrong. I was trying to guess the PSU output voltage.

I would pull and test the three polymer capacitors, or just outright replace them. SMPS IC power cap CD1 is 10uF 50V likely failed. Two output capacitors CD2, CD3 are 470uF 35V and there is room for fatter parts which is what I'd put in for longer life, whatever fits even to 1,000uF+ each. "535Z" series I can't find data on.
Consider adding silicone thermal grease to the two heatsinked parts for better heat transfer.

[stj]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

first line is the series,
second is the capacitance,
3rd is the voltage

[dfbills]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Hey redwire-

In looking at the light board, I count 304 LEDs and 11 resistors (photos attached). They're permanently bonded to the aluminum board for cooling and stability with what looks like epoxy.

I'm still interested in troubleshooting this and admittedly a complete novice. What would you suggest for next steps? I have various voltmeters, but no oscilloscope available.

(I have not replaced the three polymer caps as I don't know how the three numbers on the top translate into something I can order online.)

[redwire]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

The SMPS has no feedback, so I'm not sure how it regulates the LED power? The caps look like polymer types for longer life.

I would suspect an LED going open-circuit which can make them blink and cut out. The LED's die glue or bonding wire will make an LED oscillate due to heating and cooling making the connection. But I'm not sure how many LED's at 30W this thing has or if there are resistors etc.

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

I agree with RJ.

[R_J]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Your problem is likely CD1, but there are only 3 caps so just replace all of them.

[dfbills]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Hey CapLeaker,

I'm seeing the same issue with a different board revision from the same year. I don't have those large caps like on yours. Not sure how to find the guilty caps.

I removed one of the heatsinks and took a bunch of pictures. I would appreciate any help you could provide to target the culprit.


Dave

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Got the caps, put 'em in ... aaaand? It works perfectly fine!

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

Yeah, I know what you mean now. Yes, I've seen these fail too.

[budm]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

What I am saying is that if you measure AC V between earth GND and ether one of the cold side red or white wire, you will see AC (the current should be very low), and I have have seen that safety cap failed badly even though they are supposed to fail open circuit.

[CapLeaker]

Re: Aerogarden Ultra LED blinking or strobing grow lights repair

budm, the input of that PSU has 120VAC, which comes from the base of the unit. It has nothing to do with that cap. Basically there are 2 boards, one in the base and that one inside the LED panel.
When I measured the 120V, the LED panel with the PSU inside was unplugged.