Gamecube DOL-001 Cap Values/Original Cap Models

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alexander Gutsch
    Member
    • Mar 2025
    • 12
    • Germany

    #1

    Gamecube DOL-001 Cap Values/Original Cap Models

    Hey all!

    I need some help identifying the original model of the caps you could see on the pictures below. These all are from a Gamecube and should be replaced as a precaution/repair of the disc drive not reading discs. I know the voltages and capacities are easy to get from most of them, but since I do want to get some high quality replacement parts, I need the ESR or ripple current too to find some equivalent replacements.
    I also added a picture of an Excel sheet I made with the designators and the diameters of the caps.
    Thanks in advance!

  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30998
    • Albion

    #2
    the ones with a slanted circle are nichicon

    Comment

    • Unspun01
      Badcaps Veteran
      • Jun 2011
      • 335
      • Canada

      #3
      I have a Gamecube that doesn't read discs. Are bad caps as highlighted in your photos actually a cause for DVD-ROM drive not reading discs? I've never heard of this.

      I was suspecting a bad laser but if bad capacitors can lead to not reading discs in a Gamecube, I'm happy to have learned something new today.

      Comment

      • Alexander Gutsch
        Member
        • Mar 2025
        • 12
        • Germany

        #4
        Originally posted by Unspun01
        I have a Gamecube that doesn't read discs. Are bad caps as highlighted in your photos actually a cause for DVD-ROM drive not reading discs? I've never heard of this.

        I was suspecting a bad laser but if bad capacitors can lead to not reading discs in a Gamecube, I'm happy to have learned something new today.
        Not all of them, but the ones on the disc drive could indeed lead to the issue. I'll swap all the caps when it's already open.

        Comment

        Related Topics

        Collapse

        • proxneo
          Recapping Sony ICF-SW55 - verifying cap values
          by proxneo
          Dear reader

          I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

          At the moment, I have selected replacements based on the following list of values:

          3 x 470uF 10VDC
          3 x 4.7uF 35VDC
          4 x 47uF 50VDC
          8 x 22uF 6.3 VDC
          1 x 220uF 6.3VDC
          5 x 100uF 6.3VDC

          Which...
          06-21-2023, 12:38 AM
        • mengpo
          Siemens RVS21.831, Looking for References, Models, and Values of These Components
          by mengpo
          Hi everyone,

          Following a short circuit on the controller board of my heat pump, I'm looking to replace the components shown in the photos. All I know is that they are diodes (but I'm not sure what type), and I haven't been able to find their equivalents.
          The one on the left says: 15A 5BA
          The one on the right says: DTZ S47 or DTZ 547
          Does anyone know how to identify them?

          Thank you very much for your help!

          FYI, the card is a siemens RVS21.831
          02-15-2025, 10:50 AM
        • Document Archive
          Acer Extensa EX2540-56BF + PowerCube Original Notebook 15 Specification for Upgrade or Repair
          by Document Archive
          This specification for the Acer Extensa EX2540-56BF + PowerCube Original Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the EX2540-56BF + PowerCube Original boardview and EX2540-56BF + PowerCube Original schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...
          09-06-2024, 08:16 AM
        • Kobok
          Different (lower) resistor values on PCB?
          by Kobok
          Dear Alls,
          For sure it id a stupid question, but help me to understand. I am in a Dell 2007WFP revitalizing project - searching reason why not starting. Some resistors needed to replaced is is obvious. When I have soldered some resistors the measured (with multimeter) values were sometimes rather different written on them. I supposed these are wrong units so I desoldered and made a checking measurement and voilá the values is the same is written on. This happens only in case of a few resistors, most have the same values (+/- 10%) are written on it. "strange" SMD resistors =>103...
          09-19-2022, 07:30 AM
        • harp
          can fanless heatsink replace poor original on RX26PG2
          by harp
          I have RX26PG2 graphic card with incomplete original heatsink, only aluminium plate... but in original solution it look like such bad termal design that I asking if is proper fanless heatsink be adequate replacement ot better... what you think? Till powering on, it is propper hot......
          06-25-2025, 10:56 AM
        • Loading...
        • No more items.
        Working...