PS3 CECHC03 60GB YLOD Troubleshooting

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Woodsworth
    New Member
    • Mar 2024
    • 6
    • England
    #1

    PS3 CECHC03 60GB YLOD Troubleshooting

    I have a post on psx-place for this but thought I'd try here as well in case anyone has experience or the schematics or any kind of help. Here's the original post from psx-place:
    START
    Hi, so I bought a YLOD Fat PS3 as I wanted a repair project and thought it would be a good way to get experience. I was able to solder to the RX, TX and Diag pads on the COK-002 motherboard and was able to get external access and retrieved the codes. I haven't powered it on beforehand so these should be the last ones. I did try to get internal access immediately after but kept getting scopen response invalid and auth invalid even though the wires hadn't changed. I will try that again though. In the meantime, these are the codes I have from SYSCON:
    START
    >$ ERRLOG GET 00
    FFFFFFFF Magic
    Press Ctrl+C to exit
    >$ ERRLOG GET 01
    00000000 A0022110 2D80DAA7
    Press Ctrl+C to exit
    >$ ERRLOG GET 02
    00000000 A0022110 2C262A46
    Press Ctrl+C to exit
    >$ ERRLOG GET 03
    00000000 A0022110 2C2623C6
    Press Ctrl+C to exit
    >$ ERRLOG GET 04
    00000000 A0022110 2C26239C
    Press Ctrl+C to exit
    >$ ERRLOG GET 05
    00000000 A0022110 2C26237E
    Press Ctrl+C to exit
    >$ ERRLOG GET 06
    00000000 A0022110 2C262370
    Press Ctrl+C to exit
    >$ ERRLOG GET 07
    00000000 A0801001 2C26235E
    Press Ctrl+C to exit
    >$ ERRLOG GET 08
    00000000 A0801002 2BE6A642
    Press Ctrl+C to exit
    >$ ERRLOG GET 09
    00000000 A0801001 1DB26EDE
    Press Ctrl+C to exit
    >$ ERRLOG GET 0A
    00000000 A0801001 19CCD421
    Press Ctrl+C to exit
    >$ ERRLOG GET 0B
    00000000 A0801001 19A7F3D7
    Press Ctrl+C to exit
    >$ ERRLOG GET 0C
    00000000 A0801001 18E88C25
    Press Ctrl+C to exit
    >$ ERRLOG GET 0D
    00000000 A0801001 187A320D
    Press Ctrl+C to exit
    >$ ERRLOG GET 0E
    00000000 A0801001 1816E20B
    Press Ctrl+C to exit
    >$ ERRLOG GET 0F
    00000000 A0801004 17E0F183
    Press Ctrl+C to exit
    >$ ERRLOG GET 10
    00000000 A0801001 17DCD320
    Press Ctrl+C to exit
    >$ ERRLOG GET 11
    00000000 A0801001 17D3E1F4
    Press Ctrl+C to exit
    >$ ERRLOG GET 12
    00000000 A0801001 17C25278
    Press Ctrl+C to exit
    >$ ERRLOG GET 13
    00000000 A0801001 179B46D3
    Press Ctrl+C to exit
    >$ ERRLOG GET 14
    00000000 A0801001 1795CA5A
    Press Ctrl+C to exit
    >$ ERRLOG GET 15
    00000000 A0801001 1791E9AF
    Press Ctrl+C to exit
    >$ ERRLOG GET 16
    00000000 A0801001 1791E7AF
    Press Ctrl+C to exit
    >$ ERRLOG GET 17
    00000000 A0801001 17655D91
    Press Ctrl+C to exit
    >$ ERRLOG GET 18
    00000000 A0801001 175F7A14
    Press Ctrl+C to exit
    >$ ERRLOG GET 19
    00000000 A0801001 171A10D8
    Press Ctrl+C to exit
    >$ ERRLOG GET 1A
    00000000 A0801001 1711D6EF
    Press Ctrl+C to exit
    >$ ERRLOG GET 1B
    00000000 A0801001 1710C22B
    Press Ctrl+C to exit
    >$ ERRLOG GET 1C
    00000000 A0801001 170B0D75
    Press Ctrl+C to exit
    >$ ERRLOG GET 1D
    00000000 A0801001 16EE53B8
    Press Ctrl+C to exit
    >$ ERRLOG GET 1E
    00000000 A0801001 1694F92E
    Press Ctrl+C to exit
    >$ ERRLOG GET 1F
    00000000 FFFFFFFF 168CDC29
    Press Ctrl+C to exit
    >$
    END
    My thinking is that 2110 is the issue and causing the 1001 error. I don't know if 1004 is anything to worry about with it just appearing once and I'm not certain 1002 is a major issue, again due to its infrequency. Does anyone have any other thoughts and maybe some ideas on what to check next? Any help would be greatly appreciated.​ END

    I have since added this extra information from last nights crack at it:
    To add to this, I tried to get internal access again but still received the message of ‘scopen response invalid’ and ‘AUTH invalid’. I tried reconnecting the Diag and TX but no luck. I’ve since desoldered them so I’ll try soldering them again later. I have replaced the thermal paste and assembled enough to test. I get fan spin then it immediately turns off and I’m left with a red blinking light. It seems to be about 3 seconds before the yellow light flashes and the beeps appear. I’m stuck at this point on what to check next. I have followed @RIP-Felix guide and had success up until trying internal access.

    Based on what I could find about 2110, I could do with the schematics to locate the 5V_MISC and other components mentioned plus some guidance. If there’s something else you can think would be worth checking then I’m all ears. Thanks in advance. I can provide photos and videos if required.
    Tags: phat, ps3, sony, troubleshooting, ylod
    • Woodsworth
      New Member
      • Mar 2024
      • 6
      • England
      #2
      I did some more tonight, here’s what happened:

      Another evening on this. It was going ok then I knocked off two components as mentioned before. Not sure what they are or if the can be left out. I have one but lost the other, if someone could shed some insight that would be appreciated. I have since been able to get internal access and can post the results of the in depth error log as well as the bring up results if that would help someone assist me. I have tested the PSU and get in the kΩ on one of the 12V pins and get 5 volts on the two 5 volt pins in the psu so I’m guessing that means it’s something on the motherboard resulting in the 2110 I keep getting? Does that sound right? Thanks in advance.

      Included pictures of what I knocked off and where they were
      Attached Files

        Comment

        • Woodsworth
          New Member
          • Mar 2024
          • 6
          • England
          #3
          Also, if anyone has a schematic or knows where to find one, please can you let me know?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • gshark1
              Gaming laptop rtx 2070: Disappearing GPU after BSOD, Only using integrated graphic now
              by gshark1
              Hi, I've exhausted lots of software side options to try and fix why my nvidia 2070 GPU has disappeared from my gaming laptop MSI GL75-10SFK. The system boots and functions normally but only using Intel integrated graphics. Before, it was working fine then began having some blue screens. (I will attach the system event and mini-dump at the end of post). After a few days of the occasional BSODs it finally disappeared from device manager and never came back. I researched and attempted to troubleshoot this issue but im out of options and was wondering if yall had some ideas maybe on the hardware side....
              12-29-2023, 04:42 PM
            • Gibon378
              What caused the BSOD?
              by Gibon378
              Hello there!
              I was doing some usual stuff, browsing the internet, listening to music, coding, etc. and my computer froze. It looked like the website couldn't process the request (logging into the account, there was the loading symbol) and it took a few seconds, then my computer totally froze except for the mouse cursor. It lasted for about a minute and I got the BSOD. It happened yesterday and today (just now).

              I managed to get the MEMORY.DMP content, but I don't really understand it. Could somebody help me?

              Code:
              ************* Preparing the environment for Debugger
              ...
              06-23-2023, 06:20 AM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • RRice25541
              Sharp Lc-50UB30U may be locked out of Service Mode and Factory Mode
              by RRice25541
              So i got this tv from my neighbor, when it wasn't working right for him,, he purchased another tv and gave his old to me.
              the color is all outa wack, like the settings have been corupted,
              I've already done a firmware search using the wifi connection update from the tv and it didn't find any new update so it's got the most recent version.

              so
              The issue is i can't get into service mode or factory mode, tried resetiing it from user mode and it didn't change anything.
              when i bring up the menu and type the pass codes to access either mode the menu disappears...
              05-13-2022, 10:44 PM
            • BMCappelletti
              Lenovo Thinkpad E14 Gen3 stuck on "To interrupt normal startup, press Enter" screen
              by BMCappelletti
              Hi everyone.
              Lenovo Thinkpad E14 Gen 3, stuck on the "To interrupt normal startup, press Enter" screen.
              Found a lot of people with this issue, but with no definitive answer. Some people managed to get away accessing BIOS, going to Startup and turning off "Option Key Display". For me that only removed the interrupt normal start up message, leaving only the Lenovo logo.
              Most people say hitting Enter does not work. It's true, if you wait a few seconds. But if you hit Enter right away you get the options to enter BIOS (which works), run diagnostics (goes to a...
              02-18-2025, 12:22 PM
            • Loading...
            • No more items.
            Working...