hp prodesk 600 G3 Min

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bilen
    Badcaps Veteran
    • Aug 2014
    • 637
    • istanbul
    #1

    hp prodesk 600 G3 Min

    I need hp prodesk 600 G3 Mini bios file . old dump works but no display
    I tried the bios in the forum, the red light and the beeping won't turn on.
    old bios accidentally deleted no backup.

    Motherboard code : scorpius mb rev A 16515-1 348.06n35.0011

    s/n : 8CG8057Z48
    Tags: None
    • hoaca388
      Badcaps
      • Jan 2022
      • 12322
      • Socialist Republic of Vietnam
      #2
      Re: hp prodesk 600 G3 Min

      Originally posted by bilen
      I need hp prodesk 600 G3 Mini bios file . old dump works but no display
      I tried the bios in the forum, the red light and the beeping won't turn on.
      old bios accidentally deleted no backup.

      Motherboard code : scorpius mb rev A 16515-1 348.06n35.0011

      s/n : 8CG8057Z48
      You've been asking for bios support quite a bit, so you know how to post the original file too ? Not all models have virgin bios files.
      ↵
      Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
      ​https://www.badcaps.net/donate

        Comment

        • bilen
          Badcaps Veteran
          • Aug 2014
          • 637
          • istanbul
          #3
          Re: hp prodesk 600 G3 Min

          Originally posted by hoaca388
          You've been asking for bios support quite a bit, so you know how to post the original file too ? Not all models have virgin bios files.
          I said I don't have original bios backup

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 21853
              • UK
              #4
              Re: hp prodesk 600 G3 Min

              Originally posted by bilen
              I said I don't have original bios backup
              Post #2 https://www.badcaps.net/forum/showthread.php?t=113117 .Clean the ME firmware and it should be ok. Bios BID is P22
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                Comment

                Previous template Next

                Related Topics

                Collapse
                • ianasystems
                  Need Help Restoring BIOS and MAC Address for HP ProDesk 600 G1 SFF
                  by ianasystems
                  Hello,

                  I'm currently dealing with a BIOS corruption issue on my HP ProDesk 600 G1 SFF desktop PC.

                  After the BIOS got corrupted, my PC was showing no display, and I had to take it to a repair shop where the technician removed the BIOS chip from the motherboard and installed a BIOS I provided from a file I downloaded from the official HP website.

                  While the display issue was fixed and the system is powering up again, there's one major problem: the Ethernet MAC address is now showing as FF:FF:FF:FF:FF:FF, indicating that it's been wiped or corrupted as well....
                  04-16-2025, 02:04 PM
                • macabook
                  🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
                  by macabook
                  Hello everyone,

                  I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
                  🧩 Initial Issue
                  • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
                  • External display (HDMI) shows
                  ...
                  07-24-2025, 02:17 PM
                • pirati
                  ASUS Zenbook Pro Duo UX8402ZA BIOS
                  by pirati
                  Hello everyone,

                  I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.

                  When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.

                  I decided to try flashing a new BIOS, but since I didn’t want to desolder...
                  Today, 04:20 PM
                • Vesko356
                  [Guide] How to find the right HP bios version to flash
                  by Vesko356
                  First of all thanks to all of our members who have posted previously all methods posted here.
                  Please leave a comment if you find something new,or have anything else to add.
                  -----------------------------------------------------------------------------------------

                  Find by serial number,model number or series

                  If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
                  Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
                  Operating system and OS version.If...
                  08-11-2023, 03:27 AM
                • beBoss
                  HP ProDesk 400 G6 mini - BIOS Password attempt to remove it
                  by beBoss
                  Hi,

                  as noobie to this please excuse my lack of experience.

                  I am trying to remove a BIOS password from this machine:
                  HP ProDesk 400 G6 Mini

                  but so far I still have no success.
                  I bought CH341 programmer and decided to give it a try.

                  The programmer came with 8 pin cables and connectors or whatever everything else is called so I had to buy a new 16 pin cable because the chip which I think is the BIOS is with 16 pins..



                  I connected everything and downloaded AsProgrammer and NeoProgrammer then installed drivers...
                  05-30-2024, 12:48 PM
                • Loading...
                • No more items.
                Working...