MSI A320M PRO-VH Bricked

[anaximperator]

Hi!
I have a MSI A320M PRO-VH (MS-7C52 VER 1.2) motherboard, which originally was working with an AMD A10 CPU. My friend tried to update the bios to the latest version, and install an AMD Ryzen 5 5600G but it's bricked now. I've tried the old CPU and the new one, but I get no post.
I've tried reflashing the bios by putting it in a FAT32 formatted usb key named as msi.rom, but it doesn't do anything.
I've tried reading the IC chip with a black CH341A with the 1.8V adapter, but although I can see legible text in the dump, I get inconsistent dumps every time I try it, so I'm not confident I could flash it that way.
The IC on the motherboard reads MX25U12872F but in Neoprogrammer 2.2.0.10 it's detected as MX25U12873F.
Is there any way to fix this? Can anybody help me?
Thanks in advance!

[hoaca388]

Re: MSI A320M PRO-VH Bricked

Do you read the chip directly by removing it from the motherboard or through a clamp?

[anaximperator]

Re: MSI A320M PRO-VH Bricked

I read it through a clamp. It's worth mentioning that if I try to read the chip on another motherboard I get consistent readings every time.

[hoaca388]

Re: MSI A320M PRO-VH Bricked

Remove the chip from the motherboard and read it directly.

[anaximperator]

Re: MSI A320M PRO-VH Bricked

I'm afraid I don't have the tools to unsolder the chip to read it directly and then solder it back again.
Is there any chance this chip could be detected and read/write correctly with a programmer other than Neoprogrammer?

[hoaca388]

Re: MSI A320M PRO-VH Bricked

I'm afraid I don't have the tools to unsolder the chip to read it directly and then solder it back again.
Is there any chance this chip could be detected and read/write correctly with a programmer other than Neoprogrammer?

https://www.badcaps.net/forum/showthread.php?t=103526