Hello
Search Boardview Asus MAXIMUS VIII HERO ALPHA rev: 1.0
ref 596518 -00328 - MB0P50 - A03 0205
1st look and test:
Lots of missing components under PCH + Socket damaged and tracks ...
Lights up, starts but no reaction
initialization remains at code Q 00
following :
after inspection and replacement resitor and repair track
I replace the 0 ohm resistor under PCH and add another 0 ohm. (look pics)
NOW, motherboard start
but missing I still think 2 caps under PCH.
But problems are still present
1 pin of CPU socket is broken DDI 2 (I believe)
So no internal HDMI but with graphics cards it's OK
and many components are still missing somes places
Another problem, the BIOS indicates DDR Voltage 2.4v but directly on the ram it is 1.2v
I haven't been able to do a lot of testing so far, I don't have the heatsink
-------------------------------------------------------
may be same
Asus MAXIMUS VIII HERO Rev1.01B (60MB0M90-MB0A15)
this Bordview available on paid site, I don't have access
Search Boardview Asus MAXIMUS VIII HERO ALPHA rev: 1.0
ref 596518 -00328 - MB0P50 - A03 0205
1st look and test:
Lots of missing components under PCH + Socket damaged and tracks ...
Lights up, starts but no reaction
initialization remains at code Q 00
following :
after inspection and replacement resitor and repair track
I replace the 0 ohm resistor under PCH and add another 0 ohm. (look pics)
NOW, motherboard start
but missing I still think 2 caps under PCH.
But problems are still present
1 pin of CPU socket is broken DDI 2 (I believe)
So no internal HDMI but with graphics cards it's OK
and many components are still missing somes places
Another problem, the BIOS indicates DDR Voltage 2.4v but directly on the ram it is 1.2v
I haven't been able to do a lot of testing so far, I don't have the heatsink
-------------------------------------------------------
may be same
Asus MAXIMUS VIII HERO Rev1.01B (60MB0M90-MB0A15)
this Bordview available on paid site, I don't have access
Attached Files
Comment