Anyone have Asrock H87M -ITX Bios Dump ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mrcliem
    Member
    • Mar 2020
    • 25
    • Indonesia

    #1

    Anyone have Asrock H87M -ITX Bios Dump ?

    Hi, Anyone have Asrock H87M-ITX Bios Dump ?
    I have tried flash the .rom file from Asrock website, and does not work...

    Appreciate any help, Thank you
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 21841
    • UK

    #2
    Re: Anyone have Asrock H87M -ITX Bios Dump ?

    .
    Attached Files
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • mrcliem
      Member
      • Mar 2020
      • 25
      • Indonesia

      #3
      Re: Anyone have Asrock H87M -ITX Bios Dump ?

      @SMDFlea

      Thank You so much....

      Will try now...

      PS: It works..
      Last edited by mrcliem; 04-18-2021, 09:46 PM.

      Comment

      Related Topics

      Collapse

      • gabrieljma1
        Request: Full BIOS dump for ASRock Z790-CX (DDR5)
        by gabrieljma1
        Hello everyone,

        I’m looking for a full raw 16 MB BIOS dump for an ASRock Z790-CX (DDR5) motherboard.

        The board powers on (fans spin, RGB lights on, RAM LEDs active), but there is no display output and the VGA and BOOT LEDs stay lit.
        I’m using an Intel i9-14900KF CPU (14th gen), and it seems the BIOS version on my board doesn’t support it yet. I tried to flash the official ASRock BIOS file (renamed .ROM → .BIN) directly using my RT809H programmer, but it didn’t work — monitor stays on but with black screen, so I believe the ASRock update file is not a complete...
        10-08-2025, 03:32 PM
      • Ahari
        Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
        by Ahari
        Hi all,

        This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

        I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

        I...
        08-13-2025, 06:12 AM
      • subzerillo
        Asrock H510M-HDV/M.2 SE bios dmi area from dump
        by subzerillo
        Hello.

        I'm wondering how can I check and extract de dmi area from a bios backup.
        I know it depends on the brand and model of the motherboard. Is there some guide that could help me understand and extract the dmi from the original bios dump to a new bios file.

        The motherboard is H510M-HDV/M.2 SE

        Attached is:
        h510m is the dump bios
        h510mhms1 is the downloaded bios from the website...
        10-09-2025, 02:23 PM
      • khanhtq0
        Full BIOS Dump for ASRock H310M-HDV Rev 1.02 (MX25L12873F)
        by khanhtq0
        Hello everyone,

        I'm looking for a full BIOS dump (.bin) for the ASRock H310M-HDV Rev 1.02 motherboard. The BIOS chip is a MX25L12873F (128Mb / 16MB).

        I’ve already tried flashing the official BIOS from ASRock (version 1.40 and 3.30), but those are Instant Flash versions and don’t include the full SPI image (e.g. Intel ME Region, Descriptor, etc.). After flashing, the board powers on only when I short PS-ON to ground, and it fails to generate Vcore and 2.5V. Other rails like 1.05V and RAM voltage are present.

        I suspect the original Intel ME and descriptor...
        08-06-2025, 02:14 AM
      • mkdj
        ASUS ZenBook UX480F : need help with cleaning the ME region of my BIOS dump
        by mkdj
        Dear all,
        I have a ASUS ZenBook UX480F with the following symptoms:



        I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.

        I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
        10-19-2025, 04:41 AM
      • Loading...
      • No more items.
      Working...