need bios all in one p1801
Asus P1801 all in one bios
Collapse
X
-
Re: all in one p1801
Post your bios backup . -
-
Re: Asus P1801 all in one bios
Hi all. I am looking for EC BIOS.
Motherboard: P1801-AIO-MB REV. 3.1.
The PC shutted down by itself and after that not turning on. No damaged component or short circuits is observed. The 5V and 3.3V always on are present.
On the Asus site i found "BIOS 1002" but seems EC part is absent there (I tryed to do a search with keywords of EC chip like "ENE", "KB3926", "KB" but nothing found)
Also I was tried to read dump by CH341 programmer but unfortunetly it couldn't detect the Pm25LV512 SPI Flash (attached photo). The SPI flash was unsoldered from motherboard and soldred directly to CH341's SO-8 footprint pads.Comment
-
Re: Asus P1801 all in one bios
Here are SPI flash ME and EEPROM dumps that I was able to read.Last edited by Ardentis; 07-02-2023, 02:07 PM.Comment
Related Topics
Collapse
-
by lrouw84Hi there,
I know there is somebody who can tell me what is happening with my laptop. For start, it is an asus vivobook s510ua with an asustek x510ua motherboard with an intel i5 7200u cpu and 16gb ram.. i have a screenshot from speccy before strange things started.. as you can see the laptop type and bios version x510ua.302.I don’t manually update the bios because i don’t like to having a bricked bios, i know what troubles that gives..
I did a fresh win 11 install, and after the automatic updates, windows rebooted and automatically started asus ez flash.....-
Channel: BIOS Requests ONLY!
-
-
by adnan_uHi all,
Hoping someone can help me? I have the above mentioned motherboard which is currently failing to POST. PC boots up to the ROG logo and remains there with the green QLED lit constantly. Pressing F2 and/or Del keys to enter the bios have no effect. I have tried using Flashback to flash the latest ASUS firmware for this board, this results in an fTPM nv corrupted message and pressing Y or N here restarts the PC putting me back where I started.
I have managed to dump the winbond (w25q256jw18) bios chip using a CH341A chip reader but haven't attempted a manual reflash... -
by DynaxSCHi,
I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.
Usually on ASUS boards it worked...-
Channel: BIOS & Schematic Requests!
-
-
by chudofermerHello!
Received Asus Ally rc71l with the wrong bios.
Have the original package and all serial numbers.
Can anyone help me understand what is wrong?
Condition:
Received with an original box with all serial numbers
Due to the bios updating, something went wrong and I can not check in the bios. The recovery mode sometimes appears, usually was stopped on the logo.
Got the flash dump, nothing found on DMI section
No Windows key, just key ID on the box
What is done:
1. Flash the latest bios version with serial numbers...-
Channel: BIOS Requests ONLY!
-
-
by TechnodocAsus laptop G614JZ-N3012W Rog Strix with i7
Mainboard G634J-PMV-VGT
6050A3441302-MB-A01
2023-02-10
Power button works okay....power light goes on
Red "bottom" leds go on
Charging led works
Fans do not spin, capslock key does nothing, screen stays black
I would like to program the bios again, to rule out a corrupted bios.
However I run into a size error
The bios chip is a Winbond 25R256JVEN
Used my Xgecu T-48 to read the bioschip (using select chip as type XM25QH256B @WSON8, read somewhere...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment