Hi, need bios for HP Proone 400 G2 Touch.
Thanks in advance.
Thanks in advance.
-
-
Re: HP Proone 400 G2 Touch
did you try hp's bios from the product page.. ?
just extract the exe, and there is a .bin there.
https://support.hp.com/us-en/drivers...one-pc/7638343 -
Re: HP Proone 400 G2 Touch
On win 7 if you run the exe it extracts to C:\SWSetup ,shows a local html with instructions to update bios.It doesn`t have the full 16MB bios, just a 9MB bios update.
Try this bios with clean ME ,if it doesn`t work i can post another with the 9MB bios update merged.The cleaned ME bios may work, if it does it means you don`t have to run nbdmifit/wmdmifit/bcu to enter any DMI info.Last edited by SMDFlea; 03-13-2019, 05:46 PM.Comment
-
Re: HP Proone 400 G2 Touch
Thanks, but still not working, motherboard is turning on, fan is spinning, but display doesn't turn on.
Comment
-
Comment
-
Re: HP Proone 400 G2 Touch
thanks mate it was a great resultComment
-
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Update bios EFCN58WW to EFCN59WW for solving The Connected AC adapter has a lower wattage than the recommended AC adapter
I have a Lenovo Legion 5 15imh05a device that I bought used online. It came with a 20V 8.5A 170W charger.
The BIOS version is EFCN58WW.
When I turn on the device, it displays the message:
"The Connected AC adapter has a lower wattage than the recommended AC adapter..."
The device rarely charges the battery, and even when it does, it doesn't show that it's charging.
I've tried
...07-29-2024, 10:32 AM -
I have a Dell Precision T1650 MT workstation (of the following spec.) that was bricked yesterday when attempting to update the BIOS from A27 to A28 per:
- https://www.dell.com/support/home/en...-t1650/drivers > Dell Precision T1650 System BIOS
- Dell Precision T1650 mid tower Workstation
- Xeon E3-1225 V2
- 32Gb PC3-12800E RAM
- 4Tb SATA HDD
- motherboard: Dell part: 0C3YXR CN-0C3YXR-72200-39C-01GR-A02
I see now that others have experienced like issues e.g.:
- https://www.dell.com/community/Prec... -
Hi could you build my bios . wifi and sound card can not work
HP ProOne 600 G5 20.0-inch Non-Touch All-in-One Business PC... -
Hi all
Anyone come across this issue where a BIOS flash will only part complete?
It will update the system BIOS and Primary EC BIOS fine but fails to update the Intel TBT Retimer, Intel TBT Retimer 2 and ME Firmware.
NVMe m.2 drive isnt detected in the BIOS, but you can get into the BIOS fine and it all works in there as intended.
The drive works fine in another laptop.
Link to a video I made of what its doing here:
Any ideas on how to overcome this?
Cheers...
Comment