Hi there, maybe somebody has a desktop board ECS H61H2-M version 1.0 bios dump. Sorry for posting in laptop bios req section, couldn't find desktop req section.
-
-
Re: Desktop ECS H61H2-M V:1.0 bios needed
Download the bios from the ECS site:
http://www.ecs.com.tw/ECSWebSite/Pro...5-LL-Intel-RR-
Next, set your folder options to show Hidden Files and Folders (if using windows) .
Run the bios installer ,and in the same folder where you run the exe from, a new folder will appear called SgPTemp ,inside that folder is the full bios .Attached FilesLast edited by SMDFlea; 12-18-2018, 03:37 AM. -
-
Re: Desktop ECS H61H2-M V:1.0 bios needed
Thank you, tried it, have the bios dump now. Well mainboard acts the same as before, some fan spin and turns off, might be that the kbc dump gone bad or something else. Thank you for the tip, I tried it before, but dind't go far enough with the bios update, just need to get an error message and the bios dump file will be in that folder.Comment
-
Comment
-
Re: Desktop ECS H61H2-M V:1.0 bios needed
I guess bios should be good now, but board is still acting the same as it was before, changed the bios ic and used your bios, still does the same, tried it with original bios ic - still the same. Might be something else that failed. Thank you for your help mate.Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
I have this laptop that does boot but it's on an older BIOS that has issues with Secure Boot, and I cannot use the normal Razer BIOS updater because for some reason the serial number is missing / got deleted somehow (Common issue on this model, from what I've read). I got a dump of the BIOS chip (or at least what I think is the BIOS chip), and its 16MB in size - the files from the Razer BIOS update are 8MB. (There's two 8MB files, am I supposed to combine these somehow? Or combine with an Intel ME firmware? I have no idea).
So, I'm looking for a BIOS dump for this machine - a 16MB one.... -
Hello,
I badly need bios dump for HP DM1-4000er,
Model: HP DM1-4000er
Motherboard: DA0NM9MB6D0 REV.D
Product: QJ490EA#ACB
Please help. My bios chip burned so I don't have the old bios anymore. I need bios dump before I can install the replacement. -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
Comment