Hi there, I’m looking for the motherboard schematics for the HP Z2 Mini G9 (6050A33158801-MB-A03) in order to replace some broken decoupling capacitors near the NVMe M.2 slot. Generally, these are 0.22 µF, 15 V, 0.6 mm capacitors, but I’d like to be sure before replacing them. Additionally, the BIOS is unable to detect the ALC3205 audio codec. Thank you
-
Hi,
I'm looking for assistance with a Mac mini (M4, 2024), model A3238 (Model MCYT4LL/A), which I recently purchased. The front USB-C ports are not providing power.
Upon inspection, I've identified that a chip and an adjacent capacitor have been physically ripped off the logic board near the SSD connector.
Could anyone provide information on the specifications of this missing chip? Additionally, I would greatly appreciate it if anyone has access to the schematics and board view for the Mac mini A3238 logic board.
Thanks for your help!
... -
Hi,
anyone has a schematics and bordview for DJI Mini 3 pro?
I can see there is one on XinZhiZao, but 40$ for a monthly access, is not that little, for one time repair attempt... and i dont even know if there is complete schematic with all the details for a repair.
Thanks! -
Haven't been able to find the schematics for a Zotac 1080 mini ZT-P10800H-10P, so I'm hoping someone here can help out. Thanks in advance! -
I have this Lenovo Slim 7 16IAH7 notebook that is not booting properly. All voltages are there: 5v, 3.3v, 1.8v but it's still a no-go.
I spotted this IC chip with markings "6611c" on it. The coil near this chip measures around 200 Ohms which I think is too low. But without the schematics, it's just a guess.
I wonder if someone has the schematics for this board or perhaps, can help me identify this particular ship. Thanks.... -
Hello Everyone,
I will be really grateful if someone shares schematics and if possible the boardview of the old Asus Nexus 7 (2012) Tablet. The motherboard is ME370T Rev. 2.4. Now I can find schematics for the Rev. 1.0 but I could not find the schematics for the Rev 2.4. I tried to look for similarities in the Rev. 1 but there are somethings missing, plus the board i have has nearly no component names printed on it which as a newbie makes pretty hard for me to locate things. Any assistance will be appreciated. Thank you.