-
tryHell everyone,
I have a All-In-One PC on my table which has suddenly a startup password which is unknown. I have no access to the bios or any boot medium.
After dissassembling the device I checked online to find some information about it but it seems to be a cheep chinese version and imported to the german market.
I give you all the information I have and hope that someone can help me to retreive the password out of the dump or patch it. Any other help is also much appreciated.
AiO Model: All-in-One-PC CSL Unity F27B-JLS
PCB Code: MX_JA10S_MB_V100 - Datecode 20220428
Mainboard Code: 7AJ27H-100-V100
N6000-M.2.7625-B 22512R-LED-5V 202208040535
Serial Number: nothing written on the AiO or mainboard
Besides that I found in the dump this model number: JA10S_CSL
Thank you
Leave a comment:
-
CSL Unity F27B-JLS AiO Startup Password Removal
Hell everyone,
I have a All-In-One PC on my table which has suddenly a startup password which is unknown. I have no access to the bios or any boot medium.
After dissassembling the device I checked online to find some information about it but it seems to be a cheep chinese version and imported to the german market.
I give you all the information I have and hope that someone can help me to retreive the password out of the dump or patch it. Any other help is also much appreciated.
AiO Model: All-in-One-PC CSL Unity F27B-JLS
PCB Code: MX_JA10S_MB_V100 - Datecode 20220428
Mainboard Code: 7AJ27H-100-V100
N6000-M.2.7625-B 22512R-LED-5V 202208040535
Serial Number: nothing written on the AiO or mainboard
Besides that I found in the dump this model number: JA10S_CSL
Thank you
-
Hey guys,
have a laptop here that has a supervisor Password (dump in Attachements).
Before i write the Serial NR.etc i wanted to say that strangely after flashing with 3 different Bios dumps and one from lenovos site
the laptop works but everytime it wants me to type a supervisor password i never set.
I thought the supervisor password is stuck in the ec bios but no it isn't either because after replacing the ec chip from one of another board it still has the supervisor password.
Anyway i wanted to ask what of the two chips is the ec bios because on the left... -
Hi all, I'm new here, a few words about myself: CS student, interested in hardware stuff too - tinkering my whole life but with practically no experience when it comes to firmware "hacking".
So I have this X380 Yoga with a supervisor password in place and before doing anything stupid I figured I'd rather ask.
I plan on using the tool from this thread: https://www.badcaps.net/forum/troubl...password-remov... -
Hello,
I'm hoping someone can assist me.
I have an Asus Vivobook 16x Pro OLED laptop which has a BIOS password, and I can't seem to find it.
It still boots into Windows (boots from whatever SSD is installed but not from USB).
The model number is M7600R and serial number is N8N0CX03H71131C.
I tried AMITSESetup Decryptor but the password I got doesn't make sense (it's got a line break and special characters).
I also tried to use *************** MOD EDIT ,redacted************** and it also gave me the funny password of
...Code:tmNx\'=QJQ
-
Here is all the info you should need to remove bios password from your same model or one with an MEC-Chip and also write back the config data
T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal
See Diagram for Wiring.
Use MEC-1633#ISP on your RT809h
This is same Jtag pinout and method for T490S/X390
(But your R/W 10K Resistor Location May In a Different Location)
MEC-Chips Store Bios Password In a Secure Un-Editable Area
Following steps clear that secure area to re-initialize itself to default (Blank)
... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Leave a comment: