optiplex 7000

[volinakis]

thank you but when I wanna open this file in fit it gave an error

lol, why opening ME firmware with FIT? Open your bios backup, decompose it, save, replace ME Sub Partition with ME firmware hoaca388 provided you, rename it as ME Sub Partition, load saved config and hit Bulid tab! Read guide about how to use FIT!

[ali0robot]

lol, why opening ME firmware with FIT? Open your bios backup, decompose it, save, replace ME Sub Partition with ME firmware hoaca388 provided you, rename it as ME Sub Partition, load saved config and hit Bulid tab! Read guide about how to use FIT!

thanks for help, I now this routine but for new generation is different method. when I use this method it gave me error

[volinakis]

thanks for help, I now this routine but for new generation is different method. when I use this method it gave me error

that means you messed up with Bios_Region, you just had to replace ME Sub Partition with ME Fw provided. There's no "different method" it's the same as the older models only you can't skip generating intermediate files.

[ali0robot]

that means you messed up with Bios_Region, you just had to replace ME Sub Partition with ME Fw provided. There's no "different method" it's the same as the older models only you can't skip generating intermediate files.

I am following same thing that I was using in past generation and i didn't have any problem until intel flash image 15 but 16 look different for me. I done it like your explanation but gave me error

[volinakis]

I am following same thing that I was using in past generation and i didn't have any problem until intel flash image 15 but 16 look different for me. I done it like your explanation but gave me error

optiplex 7000 has 2 bios chipsets, you have to merge files to get full bios.

[ali0robot]

Optiplex 7000 has 2 bios chipsets, you have to merge files to get full bios.

but the problem is that this is EC bin, I didn't touch the main bios bin because I wanted to remove the bios password. problem is that I missed the EC bios bin and mistakenly I programmed another machine's EC bios bin into another one without taking backup. after programming machine started to spin so fast and gave me three amber and six white led cod that showed bios file was not correct. one professional guy told me if you can clean me region in EC bion maybe the problem will solve

[volinakis]

but the problem is that this is EC bin, I didn't touch the main bios bin because I wanted to remove the bios password. problem is that I missed the EC bios bin and mistakenly I programmed another machine's EC bios bin into another one without taking backup. after programming machine started to spin so fast and gave me three amber and six white led cod that showed bios file was not correct. one professional guy told me if you can clean me region in EC bion maybe the problem will solve

just post both backups along with serial no. , you have no clue what bios wants from you. That one trying to fix half of bios with FIT is EPIC!

[ali0robot]

they are my both bios bin
service tag: czxgwp3
OptiPlex 7000 micro
sorry if the service tag is not same with bios it's mean that I lost original file because I tried several bios bin
thanks in advance

[hoaca388]

they are my both bios bin
service tag: czxgwp3
OptiPlex 7000 micro
sorry if the service tag is not same with bios it's mean that I lost original file because I tried several bios bin
thanks in advance

OptiPlex 7000 Micro

Service Tag: CZXGWP3

[ali0robot]

OptiPlex 7000 Micro

Service Tag: CZXGWP3

after programming both chip power led gives 3 amber and 6 white

[volinakis]

they are my both bios bin
service tag: czxgwp3
OptiPlex 7000 micro
sorry if the service tag is not same with bios it's mean that I lost original file because I tried several bios bin
thanks in advance

There are 2 bios versions for your laptop, try them both. Check bottom label for model, EVT_X02_CHPB_64 is for models 0AC2,0ACC and EVT_X02_64 is for models 0AC2,0ACC. Write both chipsets.

[ali0robot]

thank you for help but unfortunately gives a 3 amber and 6 white

[kuiri]

There are 2 bios versions for your laptop, try them both. Check bottom label for model, EVT_X02_CHPB_64 is for models 0AC2,0ACC and EVT_X02_64 is for models 0AC2,0ACC. Write both chipsets.

I tried one and the computer booted (before it would have no video and a high speed fan) but the BIOS says "Unidentified System" where the model should go.
Mine is the DDR5 with a full sized - standard dell charger
I think there's a DDR4 variant also.

Edit: I tested both variants and in both it says "Unidentified System"

Edit: After updating to the latest BIOS, and pressing Alt + F on boot, I got the menu to select between the Regular Optiplex 7000 Alder Lake or the China Version with HDD Protection.

[hoaca388]

I tried one and the computer booted (before it would have no video and a high speed fan) but the BIOS says "Unidentified System" where the model should go.
Mine is the DDR5 with a full sized - standard dell charger
I think there's a DDR4 variant also.

Edit: I tested both variants and in both it says "Unidentified System"

Edit: After updating to the latest BIOS, and pressing Alt + F on boot, I got the menu to select between the Regular Optiplex 7000 Alder Lake or the China Version with HDD Protection.

OptiPlex 7000 Micro

Service Tag: 9Z1M3Q3

[ali0robot]

I tried one and the computer booted (before it would have no video and a high speed fan) but the BIOS says "Unidentified System" where the model should go.
Mine is the DDR5 with a full sized - standard dell charger
I think there's a DDR4 variant also.

Edit: I tested both variants and in both it says "Unidentified System"

Edit: After updating to the latest BIOS, and pressing Alt + F on boot, I got the menu to select between the Regular Optiplex 7000 Alder Lake or the China Version with HDD Protection.

mine is tiny model and I also change bios chip and reprogram both chip but just gives three amber and six white led light

[kuiri]

mine is tiny model and I also change bios chip and reprogram both chip but just gives three amber and six white led light

Try with a different programmer. I flashed the CHPB Variant and it let me update the bios & firmware to the latest version using the RCV file.
I only have one problem where the power on light doesn't stay on. It only turns on when I press the button to power the machine on, but the lights remain off.

[ali0robot]

could somebody do me a favour and tell me if we copy both EC and Main bios from one OptiPlex 7000 micro to another one, second pc should work or not.my knowledge is not enough about this

[peste]

could somebody do me a favour and tell me if we copy both EC and Main bios from one OptiPlex 7000 micro to another one, second pc should work or not.my knowledge is not enough about this

it might not work, you need to clear the "ME region" of the bios..because it needs to pair with the PCH...and the DMI information needs to be passed from one bios to another...

[ali0robot]

Hi guys,

finally I find good bios for my tiny pc, if anybody need can use it. it's also in manufacturing mode