Hello,
im having a Dell G3 15 3590 (P89F001, servicetag JFJ5MT2) here without a Display assembly / LCD panel.
but when turning it on it blinks 2,7 - display failure.
after buying a 40pin edp cable, i attached a display from my HP laptop but it still wont do anything.
still 2,7 blinks, display stays off. even with the PowerON + D display test.
my plan was to use it without a built in display for a project that has a external one.
it wont boot with a hdmi display or usb-c displayport dock attached too.
i also couldnt find a edid...
Comment