EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

[TigerVieH]

Hey everyone,

is there someone who can help me with the EVGA GTX 980?
EVGA141 Rev. 1.0

2 blown mosfets and the connectors needs to be done new.

Thanks in advance for your time and help!

Greez,
TigerVieH

[TigerVieH]

Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

Thanks to the admin to made my post an own thread.

Because the 4 pin connection is lost of the two blown mosfets (4927N), I need to reconnect them. To do this I need to know where they needs to be going.
A picture I have attached.

A boardview file or something like this would be very helpful and hopefully one of you can help me with this.

Thanks a lot in advance

All the best,
TigerVieH

[Bozog]

Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

Check dicky96's discord for schematics https://discord.gg/vam6YC8vwU
That looks like fun to fix

[TigerVieH]

Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

Check dicky96's discord for schematics https://discord.gg/vam6YC8vwU
That looks like fun to fix

Thanks so much!

But I'm sorry, there are no files similar to my EVGA GTX 980 :-(
So I'm still searching!

[TigerVieH]

Re: EVGA GTX 980? EVGA141 Rev. 1.0 2 blown mosfets

Hopefully I can use the empty slots above the actual damaged ones.
So I put everything from the damaged phase into the "new" ones above.

But for this the boardview would be very helpful