Re: ECS mcp61pm-hm 6-bad 1800uf 63 Tk caps
Well if you can dig up specs for the TK caps then sure, but they look to be junk, and Rubycon MCZ is pretty much the best of the best in terms of ESR and ripple handling, so I don't think there's much to worry about.
-
Re: ECS mcp61pm-hm 6-bad 1800uf 63 Tk caps
Do I need to know/compare any specs? like Resistance or ripple or anything?Leave a comment:
-
Re: ECS mcp61pm-hm 6-bad 1800uf 63 Tk caps
They look to me like 8mm diameter. Rubycon MBZ and MCZ would be suitable replacements. Make sure to know how many of each capacitance/voltage you need. You should be able to get caps from TC, owner of badcaps.net.
You'll want to measure the diameter to make sure though, as well as the height, and any height restrictions that there might be, and also the lead spacing. TC should be able to hook you up with whatever you need.
Good luck!Leave a comment:
-
ECS mcp61pm-hm 6-bad 1800uf 63 Tk caps
It originally came from an HP Media Center. I'm hoping someone can help me to locate these caps or equivalent replacements? There are 10 on the board altogether. last powered on it even still posts and such but Vista gave a bsod. I replaced the guy's board and kept this one so It would be awesome to replace the caps and use it!
Any help I do much appreciate! Thx! 
Attached Files -
-
I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.
For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).
https://www.badcaps.net/filedata/fetch?id=3591771
https://www.badcaps.net/filedata/fetch?id=3591772
It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:
https://www.badcaps.net/filedata/fetch?id=359177... -
I have an old Tivo. The Power Supplies are known to have caps that fail. Here are the caps that come with the original power supply:
I could not find replacement caps with the exact same specs. I followed an online guide and recapped the power supply with caps with these specs
The power supply now works, however the HDMI video is giving me eye strain. I don't know how a capacitor on a Power supply could impact an HDMI video signal, but it does, the Tivo interface has a flicker now and the color/brightness is off. So I want to get some new caps... -
Hello!
I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.
The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.
I have studied the board and... -
Hi,
I just noticed that my Asus V9999GT (GeForce 6800 GT) had some swelling capacitors. I managed to identify the brown ones, which are Nippon Chemi-Con KZG series, 6.3V 820µF, which I plan to replace with this.
But for the yellow ones, I guess these are Fujitsu caps, without being able to identify which series... A picture of the video card is attached to the topic.
I need to replace:- 2x 2.5V 1500µF => I plan to use this
- 2x 16V 330µF=> I plan to use this
- 1x 6.3V 680µF=> I plan to use this
Thanks for... -
I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
Leave a comment: