-M598LMR- I don´t find bad caps but

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sanjuanino27
    New Member
    • Apr 2005
    • 2
    #1

    -M598LMR- I don´t find bad caps but

    Hi everyone, this is my fist time here so I hope you can help me.

    I have a 598LMR Motherboard from PC CHIPS Manufacturer.
    I don´t find any bad caps, even if I check them with a simple digital multimeter, but the motherboard still working bad.
    I changed CPU, and RAM, and Video card but nothing happened.
    This motherboard don´t turn on.
    Actually I have an AMD K6-2 500 AFX CPU and 64Mb Ram DIMM PC 66/100
    I use an AT power and the POST ANALYZER Shows me an "ED" error, which means INITIALIZE THE BOOT DEVICE OR MEMORY SIZE. (BEEP) = 4-3-4-2

    Please help me
    Tags: None
    • RJARRRPCGP
      Badcaps Legend
      • Jul 2004
      • 6304
      • USA
      #2
      It's possible that in IDE connection problem can cause the motherboard to do nothing, fail to POST with no video and no bleeps.

      Make sure the IDE devices have the proper jumper placement and that the IDE cable isn't reversed!

      I have seen a motherboard play dead before when there was an IDE problem, probably the IDE cable being reversed or the jumpers were in the wrong places.
      ASRock B550 PG Velocita

      Ryzen 9 "Vermeer" 5900X

      32 GB G.Skill RipJaws V F4-3200C16D-32GVR

      Arc A770 16 GB

      eVGA Supernova G3 750W

      Western Digital Black SN850 1TB NVMe SSD

      Alienware AW3423DWF OLED




      "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

      "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

      "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

      "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

        Comment

        • sanjuanino27
          New Member
          • Apr 2005
          • 2
          #3
          No, there´s no problem with IDE connection because I don´t use any Hard disk, It´s only the mainboard, the video card, cpu, and ram memory.
          I replaced all components (video, cpu, ram, etc) but nothing happened.

          I tried to make a HOT SWAP ( replace the bios while the mainboard works ) but is the same... nothing happened.

          Could be the AT connection? I´ll try with ATX.

          OHH!!! I didn´t say that I put all components disabled. ( Sound, modem and LAN)

          Sorry my english is very poor

            Comment

            • MD Willington
              Badcaps Veteran
              • Sep 2004
              • 702
              #4
              Try the "Lottery"

              http://www.stud.fernuni-hagen.de/q39.../ikonboard.cgi


              MD
              Ya'll think us folk from the country's real funny-like, dontcha?

              The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

                Comment

                Previous template Next

                Related Topics

                Collapse
                Working...