Rubycon replacement caps?

Convert

New Member

Join Date: Feb 2005

Posts: 2
#1

Rubycon replacement caps?

02-25-2005, 02:19 AM

No I didn't have any rubycon caps explode on me but I do need to get ahold of some. One of my earlier gig boards had 2 gsc's go out on me, I was in a rush so I cannibalized 2 rubycon caps from my 7vaxp ultra board (v1.2).

They were 6.3v 1200UF caps, past that I can't remember what they were labeled since the board is no longer in my possession and I forgot to take a pic of them :oops:

I googled around but the only sites selling rubycon caps had the wrong versions. Where do you guys buy rubycon caps?
Tags: None
Topcat

The Boss Stooge

Join Date: Oct 2003

Posts: 16955

Country: United States
#2

02-25-2005, 02:25 AM

I have some. I get them directly from Rubycon. Just shout if ya need any. Have plenty of Rubycon 1200uF 6.3v MBZ series.

<--- Badcaps.net Founder

Badcaps.net Services:

Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team Stats
Comment
Convert

New Member

Join Date: Feb 2005

Posts: 2
#3

02-25-2005, 03:02 AM

YGPM, talk about a great place for capacitor help! I guess I should say the place for help
Comment

Previous template Next

Replacement caps for Samson Resolv studio monitor 65A Amp board.

by black6host

Good day!

I have a Samson Resolv studio monitor that has no sound output. I've opened it up and found two caps that are bulging on what I believe to be the power supply section of the amplifier board. The board is marked Resolv 65A AMP V1.2. The caps in question are YUSCON, 2200uF, 35V, 85C temp and have markings of RA(P) and are 16mm x 25.5mm tall. I've attached the schematic and the caps in question are C5 and C6. I'm assuming they are low esr caps. I've tested both caps and they test low uF, nowhere near 2200uF.

I'm going to replace the caps and I'll be the first...
- Channel: Troubleshooting Audio Equipment
02-06-2024, 08:22 PM
Replacement for the Siemens Bakelite caps in an early 1980s SMPS

by rewease

Hi everyone,

There actually was a time when early SMPS and late bakelite housed electrolytic caps coexisted in high end industrial gear. A friend of mine just got himself a CNC milling machine form that time with its first set of now 41 year old caps still installed in the PSU... and it's malfunctioning.

Two of the caps have already leaked slightly onto the board. I have not desoldered or measured any so far but they should qualify for replacement.

Now I'm wondering what to put in there as a replacement. First idea was state of the art low-ESR Nippon KY,...
- Channel: General Capacitor Questions & Issues
09-17-2023, 12:53 AM
Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!

by momaka

I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

https://www.badcaps.net/filedata/fetch?id=3591771

https://www.badcaps.net/filedata/fetch?id=3591772

It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

https://www.badcaps.net/filedata/fetch?id=359177...
- Channel: Troubleshooting Power Supplies and Power Supply Design
03-12-2025, 03:42 PM
Replacement caps ok? (smoothing caps, PSU heating controller)

by HectoPascal

Hallo,
i want to replace two smoothing caps from a heating controller PSU. They are probably 30 years old and it might be time to replace them.

SXE 470uF 63V 105°C (tested: 472uF 0.35Ohm) --> Nichicon VY 105°C - 463uF 0.15Ohm
SXE 470uF 25V 105°C (tested: 422uF 0.63Ohm) --> Samwha K5A 85°C - 446uF 0.10Ohm (or Panasonic RAD FC 470/25 8mm)

I couldn't find anything about 'SXE'. That's the only declaration on the caps. Edit: The top/bottom ident says Nippon CC.
Nichicon should be 'VY' series (linked).
I couldn't find anything about Samwha...
- Channel: General Capacitor Questions & Issues
09-06-2023, 08:30 PM
XBOX One S caps value and replacement

by Techboxcomputer

Hi -
I saw there was another post similar to this, but I do not believe he was referring to the same caps I am seeking.
These caps are in the “B” section of the board and the board is marked C9C11, C9C4, C988. The caps appear to be aluminum sheathed and are marked “FP 95 CD 271 16” The Digikey tech's best guess was Nichicon 16v 271 uf but I don't want a guess and solder in the wrong cap. Do any of you know exactly the value of these caps and a good replacement for them?...
- Channel: Troubleshooting Game Consoles & Other Weird Devices
12-21-2022, 08:35 AM
Loading...
No more items.

Rubycon replacement caps?

Rubycon replacement caps?

Comment

Comment

Related Topics