Abit BP6

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MD Willington
    Badcaps Veteran
    • Sep 2004
    • 702

    #1

    Abit BP6

    Hey, just got a hold of a BP6. Probably needs a recap. I'll keep you posted on what's happening with it.

    MD
    Ya'll think us folk from the country's real funny-like, dontcha?

    The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

Related Topics

Collapse

  • Foetuss
    Recap motherboards :: Abit KG7-LITE and Soltek SL-75FRN2-L
    by Foetuss
    Hi all

    Hope this is in the correct place.

    I'm planning on recapping both motherboards. I actually already ordered recplament caps for them, where I will be changing out most for poly's.
    Could use some double checking to see if I'm not doing something stupid .

    Pictures of the boards are attached.
    What I will be replacing with what : (planned)

    Soltek Golden ::
    4 1500µF 16V 10mm (5mmL) KZG => APSG160ELL152MJ16S (Chemi-Con 1500µF 16V)
    6 3300µF 6.3V 10mm (5mmL) KZG => APSG160ELL272MJ20S (Chemi-Con 2700µF 16V)...
    01-18-2025, 11:44 AM
  • momaka
    ASUS P5GC-MX motherboard recap
    by momaka
    Here’s another motherboard that needed a full recap: an ASUS P5GC-MX.
    This one was gifted to me some years ago by user Pentium 4, along with a few other goodies. It actually came in working order with no bulging or leaking caps. However, I noted there were United Chemicon KZG caps everywhere on the motherboard. The CPU VRM output (CPU V_core) was the only exception: it had only 2x KZG. The rest was 6x UCC TMV 4V 680 uF caps… which aren’t any good news either.

    So here is what the motherboard looked like with its original caps:


    CPU VRM area up close…...
    01-27-2021, 11:59 PM
  • tomalamix
    Abit NF7-S v2 Recap - Not posting
    by tomalamix
    Hy everyone,

    New around here but I've been reading a lot from several threads around here.

    I have between hands an old Abit mobo, the NF7-S v2. It was working until a few years ago, but then started to start-up only sometimes and now doesnt start up at all.

    The red light comes on with the PSU connected and the green light comes on too when i turn it on but no joy, it doesnt POST, no beeps, just the green led comes ON.

    I've tried changing 5 capacitors so far, 5x Rubycoon 6.3V 3300uF that are around the CPU, no joy, same thing, no POST and green...
    11-09-2020, 07:07 AM
  • momaka
    no-name Radeon 9600 XT recap and cooler
    by momaka
    I've been seeing a lot of cheap-looking (but not always so cheap) no-name AGP video cards on eBay for a while. They started popping up quite a bit when the market for AGP cards became more alive all of a sudden due to interest in “retro” PCs. One thing that struck me about these cheapo cards is that they almost always seem to come with garbage caps - including the abominable Sacon FZ. That aside, though, I've been wondering about the rest of the quality (or lack of?) on these cards. So I decided to satisfy my curiosity yet again.

    This one was actually suggested to me by ChaosLegionnaire....
    11-06-2020, 07:54 PM
  • ziplock
    Abit BE6-II motherboard
    by ziplock
    Greetings,

    I have an Abit BE6-II motherboard that posts sporadically with the bare minimum components installed - CPU, RAM, PSU, and a Keyboard. I know it posts when the speaker beeps. Re-seating the components has no effect.

    I thought the sporadic posting might be capacitor related. Upon inspection, non of the caps are bulged or leaking and they are all original. So, I pulled them ALL. While the ESR is OK, over half of them are leaking current between 1 and 2 mA. The biggest offenders are way out of spec, like a 1500uf / 6.3V measuring 2600uF and many of the 820uF caps...
    04-20-2025, 02:09 PM
  • Loading...
  • No more items.
Working...