Announcement

Collapse
No announcement yet.

Need help about my MSI K7N2 Delta ILSR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help about my MSI K7N2 Delta ILSR

    i have this 1 pc. of SMD cap suddenly remove in my mobo but my mobo still working but what i notice is the mobo always reaches its temperature to high i cant even play games anymore because it hungsup. does the smd cap has to do with it or i have to change my HSF im using amd athlonxp 2000. do i have to replce the smd cap that was remove?

    if i will replace it heres what written on top of it 47 16s i83. Ive already look any where but i cannot find an exact copy of it or another replcement that i can use. I find one site that sales in our country http://www.rsphilippines.com/ but i cant find the one that can replace for it because its not desame or maybe its just different version. any could help me pleaseeeee.

    #2
    Re: Need help about my MSI K7N2 Delta ILSR

    also im still using the mobo but the problem is when i played games it hungs up but when im just doing some typing it does not hung up.

    Comment


      #3
      Re: Need help about my MSI K7N2 Delta ILSR

      It's a 16V 47µ cap. If you don't find a SMD replacement, you can solder in a through-hole part if it's not too big. (be careful about polarity - SMD caps usually have their positive side marked.)

      How high are the temperatures? Have you checked for bulging caps? Your power supply could be the source of trouble as well.
      "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." - H.L. Mencken

      Comment


        #4
        Re: Need help about my MSI K7N2 Delta ILSR

        @kikkiman
        i did not check the powersupply yet but i will check it if still heats up. my system temp reaches 30 to 40 Degree and cpu temp reaches 40 to 65 degree. Its a very very small smd cap is this 16V 47µ cap can replace the one on my board i cannot solder it anymore because its foots is cut off already. i will take a picture of it. Thanks for the help.

        Comment


          #5
          Re: Need help about my MSI K7N2 Delta ILSR

          hi rayken,

          system temp reaches 30 to 40 Degree and cpu temp reaches 40 to 65 degree
          65 °C isnt that nice but not really critical. shouldnt cause instability.
          have u changed anything else?

          btw kikkoman, u ve got a pm

          Comment


            #6
            Re: Need help about my MSI K7N2 Delta ILSR

            Originally posted by rayken
            i have this 1 pc. of SMD cap suddenly remove in my mobo but my mobo still working but what i notice is the mobo always reaches its temperature to high i cant even play games anymore because it hungsup. does the smd cap has to do with it or i have to change my HSF im using amd athlonxp 2000. do i have to replce the smd cap that was remove?

            if i will replace it heres what written on top of it 47 16s i83. Ive already look any where but i cannot find an exact copy of it or another replcement that i can use. I find one site that sales in our country http://www.rsphilippines.com/ but i cant find the one that can replace for it because its not desame or maybe its just different version. any could help me pleaseeeee.
            KABAYAN!!!!

            From what part of the Philippines are you from?
            CPU: Sempron 2500+ / P4 2.8E / P4 2.6C / A64 x2 4000+ / E6420 / E8500 / i5-3470 / i7-3770
            GPU: TNT2 M64 / Radeon 9000 / MX 440-SE / 7300GT / Radeon 4670 / GTS 250 / Radeon 7950 / 660 Ti / GTS 450

            Main Driver: Intel i7 3770 | Asus P8H61-MX | MSI GTS 450 | 8GB of NO NAME DDR3 RAM (2x4GB) | 1TB SATA HDD (W.D. Blue) | ASUS DVD-RW | 22" HP Compaq LE2202x (1920x1080) | Seasonic S12II-620 PSU | Antec 300 | Windows 7 Ultimate with SP1

            Comment

            Working...
            X