Damaged GPU Inductor Query

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • slybunda
    Senior Member
    • Feb 2012
    • 138
    #1

    Damaged GPU Inductor Query

    Hey all, iv got a graphics card ( Nvidia RTX A1000) it has a chipped inductor on it. Now the card seems to work perfectly fine with no issues so i get the feeling i should just leave it be and carry on using it but to be on the safe side i would like to keep a spare inductor in stock incase i feel like replacing it one day.
    Any one know which part number i should get? the pics show it to be a 1R0 but not sure on package size etc. RS components is close by to me and my preferred place to go for genuine electronics stuff.
    3 Photos
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • momaka
      Corsair CX750M [Model 75-002019] - burned output toroid inductor
      by momaka
      Looks like I may need a little help from the PSU experts (or anyone really! ) I have a Corsair CX750M (Model 75-002019) that I picked up for free about 4 years ago. This is the PSU:



      So here’s what’s strange about this one: it appears to work normally (normal output voltages) and any PC is stable with it. However, after a while (typically 10-20 minutes, but time can vary depending on the load), there is a sweetish smell of burned magnet wire insulation emanating from the PSU. Upon opening the PSU after this happened (many times), I was able to confirm...
      09-19-2021, 08:44 PM
    • Bartoloni
      Lenovo S145 -15iwl vcore inductor warm.. looking with oscilloscope there is a spike.
      by Bartoloni
      Hi, i have a Lenovo S145 that after 20 seconds shutdown and restart (it's working correctly on thse 20 seconds)
      everything seems ok, but on Vcore inductor ( this is an i3 with just 1 switching power supply for CPU)

      there is an output to teh CPU with a spike.. seems that inductor can't handle the input...
      replaced the capacitor (330) and the inductor (R15) without any change
      any idea? very thank you!

      input of the inductor seems as usual... only strange thing is that the upper/lower voltages seems to be 21V (main power line is 19.3) ... but not sure this...
      12-09-2024, 12:42 PM
    • badcap111
      How to read inductor specs?
      by badcap111
      I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

      INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

      I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
      09-12-2023, 01:25 PM
    • silver60618
      Blown Inductor on WD My Passport
      by silver60618
      Hi Guys, my WD My Passport drive powers on, then powers off. Ive taken out the motherboard and identified a blown Inductor. Im trying to recover my data only

      Reading between leads show nothing. If I removed this Inductor, what would be a suitable replacement? am I correct that its a ferrite Inductor is to just filter noise?
      Ive seen people just bridge them, any harm in replacing it with a differnt value Inductor?

      Lastly am I correct in thinking there is no polarity on the smd component?

      Thanks!...
      04-05-2024, 09:54 AM
    • limcc
      MSI Tomahawk B550 no beep
      by limcc
      I have a Tomohawk B550 that die suddenly. No BSOD, no weird sign or no POST/boot just a day before it happened. Fans are spinning, BIOS had flashed several times, CMOS cleared, battery removed, etc. CPUs--5600 and 3700X were tested working on 3 other boards--Aorus X570/Auros B550M-Pro-P/TUF X570, so as the PSUs--RM650x/HX650 , as well as the DRAMs, all components are tested working. The only indicator it show was DRAM LED kept lit up, no beep. The same symptom also happen on my 9 years old TUF X99 board but thats another topic, probably due to age.

      Today I bring out the board to check...
      3 Photos
      11-16-2024, 12:27 PM
    • Loading...
    • No more items.
    Working...