identify this burnt element on ZOTAC GeForce RTX 2060

fraser34

New Member

Join Date: Jan 2019

Posts: 7

Country: Canada
#1

identify this burnt element on ZOTAC GeForce RTX 2060

04-28-2025, 10:06 PM

Hi,

Can anybody, please, help to identify this burnt element on ZOTAC GeForce RTX 2060 6GB 192BIT GDDR6?
It says something like "6UDN..." on it.

Thanks

Attached Files
Tags: None

Previous template Next

Zotac GTX 260 burnt component - can anyone identify?

by dicky96

Hi guys
This Zotac GTX 260 had a high side MOFET on one Vcore VRM phase short circuit Drain to Gate (Not short Drain to Source)

This has burnt out the drive IC L3E (ADP3110A) and also an SOT-23 device very close to the driver IC. According to the PCB markings 'Dxxx' this is likely to be a diode.

Basically the VRM has 4 phases, two powered from one 6 way connector and two powered from the other 6 way

I would assume each pair of phases are basically identical, the burnt out phase has SOT-23 devices WW1 plus the burnt one.

The good phase...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
12-01-2021, 01:02 PM
Gigabyte H610M S2H V2 help to identify the element.

by flysky

There is a motherboard Gigabyte H610M S2H V2 (DDR5), I can't find boardview
Help to identify the element, marking on the element - C31PH. It stands next to the USB 3.0 and it looks like it is ESD Protect chip. We need a datasheet to this element. Maybe someone has already identified such an element. Help please.

...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
01-23-2025, 07:21 PM
Help me identify this burnt chip

by hoak

Hi,
I have a Asus Q540v laptop which has no power. I opened the laptop and found this burnt chip. Unfortunately, the marking on the chip is damaged. Anyone able to identify this chip?

THanks,
...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-05-2025, 07:58 PM
Help identify 3 pin smd element marked A22020

by Gentian

I am not able to identify this element marked A22020. Some short indexes suggest it is a n-channel mosfet or a pnp transistor. I measured it and it looks to have only a very small capacitance between pins 2 and 3. Any suggestion would be very important. In my experience whatever it should be a dead component. The device is a level radar which looks no current consumption although 12V and 3.3v are ok at MCU and in the circuit but no data transmission?...
- Channel: General Electronics Technical Discussion
01-25-2025, 05:55 AM
DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components

by thesame

Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

...
- Channel: Troubleshooting TVs and Video Sources
02-27-2024, 04:31 AM
Loading...
No more items.

identify this burnt element on ZOTAC GeForce RTX 2060

identify this burnt element on ZOTAC GeForce RTX 2060

Related Topics