I can't identify the component in the photo.motherboar /dan14bmb6e0 .
Component identification dan14bmb6e0
Collapse
X
Related Topics
Collapse
-
by ub6ib969Hi,
Can someone help identify the following component ? this component get very hot. This is from a Lenovo legion LA-M822p motherboard.
any schematics or board view for this motherboard ?... -
by ManiackkHello,
Device: PocketBook InkPad 3
Mainboard: XRZ_E091_PB740-VTTOA-V1.1 / 2017-10-12
I'm replacing the broken microUSB connector on this e-reader, and during inspection after desoldering, I noticed a loose black SMD component marked "CT". One of them was torn off along with the pad, while the other one (marked in the photo) is still in place.
I would appreciate help identifying this component.
Measuring the loose component with a multimeter gives 5.84 MĪ© in both directions, while the one still on the board shows no measurable...2 Photos -
by cinkoxidHi guys,
I wanted to test a DC adapter and I plugged it into my device and then I immediately smelled the cooked component. I cheked the adapter again and I discovered that it's not a DC but a 24V AC adapter
I took apart my tester and I think I found which component burned but I can't identify it for sure and I'm not sure where could i buy a replacement part which is the same or has similar features.
I attached a few pictures of the component. I think it's a voltage regulator but some of the markings on the component are burned.
Name of the... -
by Byte_76I have a Radeon HD3870 X2 which has all voltages and cores get warm but the card is not detected by the PC.
There is this component on the PEX reset line but I don't know what it is and what the pinout is.
Can anyone help me to identify the component?... -
by zaliukHello,
My bluetooth JBL headphones stopped working and i would assume that marked in red component has to do something with it. Can anyone help me identify it? Cannot find by searching name "LASB"
Thank you... - Loading...
- No more items.