Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help you update the firmware on the docker.
But on my side, it doesn't do it.
It keeps saying update required and then says either that FW has failed or starts again over and over again...
I restarted checked different cables but again and again and again the same result. Nothing changes.
Another solution would be to burn -again the .bin file to the bios/eeprom chip directly but for sure i would need to have the original part / bin file to burn into the chip itself... (if i will find or anyone has fixed something like that)
Here is a part of the code, and please help out ?
Thanks a lot guys !
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help you update the firmware on the docker.
But on my side, it doesn't do it.
It keeps saying update required and then says either that FW has failed or starts again over and over again...
I restarted checked different cables but again and again and again the same result. Nothing changes.
Another solution would be to burn -again the .bin file to the bios/eeprom chip directly but for sure i would need to have the original part / bin file to burn into the chip itself... (if i will find or anyone has fixed something like that)
Here is a part of the code, and please help out ?
Thanks a lot guys !
Code:
USB-C Dock Gen2 FW utility V1.1.20 Package including (DP hub : 5.07.001, USB hub : 0D24,0D23, PD Billboard : 0.1.0.30, PD CCG4 : md.0.0.37, Audio codec : 49-0E-43) ---------------------------------------------------------------------------------------------------------------------- Update date: 10/2/2024 Update time: 9:21 μμ Before TimeDelay: 9:21:18 μμ After TimeDelay: 9:21:18 μμ TBT Force Power Enable Switch5G... Checking current Dock FW version : ------------------------------------------------------ Firmware version is : Unknown The detail firmware version of each component : DP hub version : 0.00.000 USB hub version : 0D24,0D23 PD Billboard version : USB-C Dock Gen2 FW utility V1.1.20 Package including (DP hub : 5.07.001, USB hub : 0D24,0D23, PD Billboard : 0.1.0.30, PD CCG4 : md.0.0.37, Audio codec : 49-0E-43) ---------------------------------------------------------------------------------------------------------------------- Update date: 10/2/2024 Update time: 9:21 μμ Before TimeDelay: 9:21:18 μμ After TimeDelay: 9:21:18 μμ TBT Force Power Enable Switch5G... Checking current Dock FW version : ------------------------------------------------------ Firmware version is : Unknown The detail firmware version of each component : DP hub version : 0.00.000 USB hub version : 0D24,0D23 PD Billboard version : 0.1.0.30 PD CCG4 version : md.0.0.37 Audio codec version : 49-0E-41 Update is necessary. Current USB hub version is the same, no need to update. Current PD Billboard version is the same, no need to update. Current PD CCG4 version is the same, no need to update. Estimated it will take 01 minute(s) and 01 second(s) for Firmware update progress Start to update DP hub FW... Update DP hub FW...Fail Start to update Audio codec FW... Update Audio codec FW...Pass Switch10G... TBT Force Power Disable ThinkPad USB-C Dock Gen2 FW update Finished 0.1.0.30 PD CCG4 version : md.0.0.37 Audio codec version : 49-0E-41 Update is necessary. Current USB hub version is the same, no need to update. Current PD Billboard version is the same, no need to update. Current PD CCG4 version is the same, no need to update. Estimated it will take 01 minute(s) and 01 second(s) for Firmware update progress Start to update DP hub FW... Update DP hub FW...Fail Start to update Audio codec FW... Update Audio codec FW...Pass Switch10G... TBT Force Power Disable ThinkPad USB-C Dock Gen2 FW update Finished
