all rubycon yxg but the 2 lelon on vrm input.
what was saved doing this?
what was saved doing this?
Attached Files
-
-
Re: aopen ak73.
yecch. what brand of fan is on the CPU heatsink? looks like either panaflo or delta. -
Re: aopen ak73.
I'm still asking the same question of my AK79G-Max's original Lelon/Chemicon combination
Comment
-
-
Re: aopen ak73.
not sure of the fan.
psu was bad too and cust declined in favor of a replacement system we had.
psu is aopen made by fsp and full of exploded jamicons.Comment
-
Re: aopen ak73.
yuck. Pity those great Fortron PSUs fail b/c of caps.Comment
-
Is there a time limit to when / how images uploaded to the internal server are governed?
My uploads from around December last year are gone? Is badcaps forum going under? -
What we have here today is an Intel DG33FB motherboard, circa 2007... I need to replace some of the caps on this board... From what I have found, one of these caps was sort of well known here back in the day as they were used in XBoxes and XBox 360s as well....They are the Rubycon MFZ series, in particular the 6.3 v 3300uf 10mm X 20mm... I have found a seller on Amazon, The Capacitor Store, that has them listed but I have a hard time believing these are genuine pieces... The original recommendation was to replace any bad ones with Nichicon HZ series since the Rubycon MFZ's were a custom product,... -
Hello Badcapers ,I am Amijim and I am about to change the caps on two ancient socket 370 dual motherboards from 2001 and I would like to you if the Lelon RXW low ESR caps I can find locally is a good replacement part.Also i would like to ask you what wuld be better ,change the original 2700μf caps to 3300μf or 2200μf? Thank you....04-02-2022, 12:09 AM -
Hello, I'm working on an old Dell XPS410 with burst capacitors. I'm trying to source either an equivalent replacement, or a replacement that will work. It's been suggested to me to use Poly caps as a replacement, but I have no idea what to order or what will work.
If anyone has a link to where I can buy what I need that would be even better.
These are the caps that have burst:
Board location: C8BV, C26BV, C43BV
Brand: United Chemi Con
Series: KZG
Size: 10mm dia X 25mm height
Impedance: (ohms max/20c, 100kHz) .012
Ripple: 2800... -
How good are lelon caps ? I see some people install RGA Lelons currently. Also could see some old posts where lelons are reffered as the badcaps.
Comment