Re: EVGA = Crap??
Badcaps.net doesn't carry anything that can replace the 16V 470uF FZ in 10mm. The options in the US are polymer from digikey or 10mm Nichicon HN from mouser. I'm not sure what stores will ship to Canada.
Specs for 10x12.5mm FZ:
ESR: 22 mOhms
Ripple: 1800 mA
Badcaps carries suitable replacements for all other values of FZ though. For the 8mm diameter FZ, you can use Rubycon MBZ/Samxon GC or equivalent. For the 10mm FZ, get MCZ/GC.
-
Re: EVGA
He did. They are ALL sacon FZ except the ones on the VRM, which are Lelon polys (probably OCR)Leave a comment:
-
Re: EVGA = Crap??
nForce 4 right? nForce 4 is ok and worth fixing, unlike all the later nForces which have defective substrate engineering.
No why exactly would you BUY a board like this? Sure it has two PCIe x16 slots, but don't you know how old 939 is? Also I believe these boards are DDR, at least the A8N-E board I recapped recently was.
Besides the Sacon FZ, list the brand and series of the other caps.Leave a comment:
-
EVGA = Crap??
So i bought an EVGA Socket 939 board, 133-K8-NF41, off ebay. Seller admitted it had one blown cap.
It arrived yesterday, and EVERY cap on the board is SACON, except for the VRM caps which are 10mm 1500uf 2.5v LELON solids.
I expect I will replace every one of the caps on the board.
The SACONS are FZ63 1500 6.3V and FZ57 470uf 16V and one FZB 470uf 16V. These are made to look like solids but are vented. All 10mm,
There are also 2 of the (SOYO leftover?) shiny 1500uf 10v.
Also 2 little spring loaded push-button switches marked "power" and "reset" as well as
a goofy looking 2-digit LED.
This is a SLI board with two x-16 PCI-E slots.
Anyone care to suggest suitable replacement caps?
Obviously EVGA is not trying for high-quality!
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
I have been having issues with this garage door opener for a while first the range of the remote was a lot less and sometimes it would start to go down and stop for no reason that I could find and would every once in awhile to start with then it started going more frequently until last Saturday when I opened the garage door it refused to close so I cranked up force all the way maximum limit this did not work also the sensor on one side that has a green and red lights that are supposed to be on when the door is open and there are no obstacles in the way on the original board the only light that...
-
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
Leave a comment: