About MODS & MATS

00__Nomad__00

New Member

Join Date: Oct 2023

Posts: 2

Country: US
#1

About MODS & MATS

11-12-2023, 04:12 PM

Do MODS & MATS work with older nVidia GPUS, specifically the G71 M ?
I've tried versions 173.48, 400, and 455, but it can't detect the GPU, even though the GPU is detected in Windows and functioning properly. I couldn't find any lists of supported GPUs.
Tags: None

Previous template Next

Palit RTX 2080 Super Jetstream Mats/Mods help

by Maxim Bojko

Hello,

I have a RTX 2080 that is broken, but interesting thing is that the card works how it should work, but when playing the card crashes, black screen fans go to 100% and nothing happens anymore. I changed thermal paste because I thought it was overheating, but no. So I checked with gpu z and here is what I had.

After a while a dude I got friends with told me to underclock the gpu via msi afterburner. First to underclock the core speed by 200 then open the chart for the mhz and voltage and said that I should change the mhz at 0,9v to 1900mhz. Since then I doesn't crash...

5 Photos
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
09-18-2024, 04:18 PM
Mats / mods: detected and repaired GPU fault. Cant seem to test after!

by chronic519

Hello.

GPU came in, green lines. Spent lots of time using to get the Mats / mods drive working (found on youtube).
Found issue with a RAM block
Replaced, green lines gone.
Trying to test again, assuming getting the false positive. Originally had over 1K on a single bank. Now getting tosses low between banks.
Used a good card to test and same results low errors 32+.

I am just search for some form of command to do a full test on the GPU.
I just ran the mats command with my good GPU and passed after roughly 40 min.
The repaired one, ran...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
05-20-2025, 07:56 PM
MATS/MODS Testing

by manuforti1314

I have a GTX 960 2GB that I have replaced a memory module.

Prior to the replacement MATS gave an error on A1. After the replacement I get no errors.

The cards can runs fine until about 20 minutes into a Heaven loop, the I get a black screen or a frozen messed up display. Needs a power reset to correct. Always boots fine and always passes MATS test.

My question, are there an other MODS tests I can run to detect an error?
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
09-04-2022, 08:12 AM
rtx 3090 passes mats, wont run mods or install driver

by davetheshrew

Hi

Got a gigabyte eagle 3090 that had a blown 12v vrm and two fuses so fixed them both, card boots.

It passes mats mem test no problem but if I run any mods test I get black screen and no response. Same if I put it on windows, install driver, black screen, nothing.

Any ideas? I checked all resistances and voltages and all seems good, its very confusing.

Thanks
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
02-11-2023, 06:11 AM
Each GPU reballing produces different MATS results, looking for root cause ?

by DynaxSC

Hi,

I have an Nvidia card which makes me wondering, what is the root cause for Mats errors. The story is as follows:

1. When I received the card Mats showed one memory with errors.

2. Replaced the memory chip, but no change, still same error, so memory chip is ruled out.

3. Made a carefull reballing of the GPU, MATS showed 3 memories with errors, the one before, and 2 other new chips.

4. Made a second reballing of the GPU and Mats shows again only one memory chip with errors, the same on as in the beginning.

5. Made...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
12-11-2024, 07:44 PM
Loading...
No more items.

About MODS & MATS

About MODS & MATS

Related Topics