Hello,
Does anyone have a source for replacement RTX 3080 HDMI ports?
Artron HDMI 2.1 is the OEM part.
Thanks in advance
Does anyone have a source for replacement RTX 3080 HDMI ports?
Artron HDMI 2.1 is the OEM part.
Thanks in advance
-
hello all i have a lg 60pa6500 trying to find a replacement hdmi port i ordered some but the legs dont line up as there not symmetrical thanks -
I did an hdmi port repair for a PS5 and I lost the small diode z71 SOD923 on the back of the port. I did a trace repair for pin 19 of the port as well. Without the diode I get no display at all. I tried replacing the diode twice but after I get flux on it the marking comes off so I can't tell if I have it on the right orientation. When I measure I get a reading of 1(open) and 923 in diode mode. Is 923 a normal reading for these and also which side should the reading be with regards to the arrow on the board?... -
Hello!
Looks like I fried something when my EDP cable got squeezed on the hinge. I replaced the cable but still no display. Laptop works fine with external monitor connected through HDMI and Display Port-USB C port. I took it apart and I see a burnt component. Can anyone help me identify what this component is? I tried to use schematics for another G15 but it does not match on the amount of pins and size. I attached pictures. The component has a label on it - (21A29)
Laptop is a Asus G15 Advantage Edition 2021 Laptop Ryzen 9 5980HX - 6800M... -
Long story short. i am building a fully custom car radio. and want to use a extremely bright LCD.
sadly the DGPU seems to be nonfunctional after i fixed the bios (fried voltage controller). so the Original HDMI port does not work.
you can use a EDP TO HDMI adapter to add a HDMI port as replacement to the onboard EDP LCD connector,
HOWEVER it turns out. lenovo enforces a LCD whitelist.
this means you cannot upgrade the LCD despite matching EDP specs and voltages.
If i connect a new screen directly to the system. only static shows.... -
Hello.
Have this ps5 pro EDM033 that came with damaged hdmi connector. i replace it and console works for few days but show hdmi problems when cold start. so cold joint. reflowed connector and decoder ic as i think he have cold joint. but now i have only one beep and no start. can heatdamage of this decoder ic prevent start?
i have ps5 repair guide but not ps5 pro so link me to it if u know it
Comment