Friend of mine gave me a Gamdias Boreas M1 Chinese CPU Cooler saying its brand new and did not worked after arrival. i so take a peak inside.
if not good, the fan axial is built in to hosing. it cannot be replaced.
it seems motor controller is burned.
It has marking Hk0YA (simple k letter)
as i have identified these are the pins
1 fan ground
2 ground
3 fan motor
4 fan motor
5 pwm
6 12V
could any one please identify this! or a recommend a replacement part.
of course i can attach another fan using fan clips, then i have to throw away top RGB cover. since its a cheap fan its not worth going to more toruble,
cheers!
if not good, the fan axial is built in to hosing. it cannot be replaced.
it seems motor controller is burned.
It has marking Hk0YA (simple k letter)
as i have identified these are the pins
1 fan ground
2 ground
3 fan motor
4 fan motor
5 pwm
6 12V
could any one please identify this! or a recommend a replacement part.
of course i can attach another fan using fan clips, then i have to throw away top RGB cover. since its a cheap fan its not worth going to more toruble,
cheers!
Attached Files