Friend of mine gave me a Gamdias Boreas M1 Chinese CPU Cooler saying its brand new and did not worked after arrival. i so take a peak inside.
if not good, the fan axial is built in to hosing. it cannot be replaced.
it seems motor controller is burned.
It has marking Hk0YA (simple k letter)
as i have identified these are the pins
1 fan ground
2 ground
3 fan motor
4 fan motor
5 pwm
6 12V
could any one please identify this! or a recommend a replacement part.
of course i can...
oxygensys
New Member
Last Activity: 07-12-2023, 12:16 AM
Joined: 06-03-2020
Location: kalutara
-
Help to indentify 6 PIn SMD Fan Controller
-
Re: Asrock Z77 Extreme 4 full BIOS .bin request please
thank you -
Re: Please Indentify This resistor
I instaled a 1amp fuse, all working nowLeave a comment:
-
Re: Please Indentify This resistor
Voltage goes up. and stay without dropping, it was made out old laptop cells, I ave to reassemble battery today, but it alll start after changer incident.
is BLACK BLACK SILVER GOLD i think, now resistor shows .8ohm resistance...Leave a comment:
-
Re: Please Indentify This resistor
I will post a good picture today....Leave a comment:
-
Please Indentify This resistor
I brought a made in china Li-Ion Charger
7S - 29.4 V to charge my Ebike battery. unfortunately i accidentally chage the + and - and powered on the charger
this got burned, i replaced it with a 0.1phm resistor. but now only voltage goes up. battery does not hold much charge.
i could not find this on aliepxress or local stores
any ideas?... -
Re: New Members - please post your introductions here
hello guys, new here, well newly registered, although i was reading post, and getting help from already posted topics for years, may be 10+ years.. but now i need to repair some PSU, since covid prices has gone up in my country and there are not much styff due to import regulations, well hope i can learn from u guys
cheersLeave a comment:
No activity results to display
Leave a comment: