Need Help Identifying Component on Razer Mouse

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • oringmonkey
    New Member
    • May 2023
    • 5
    • USA

    #1

    Need Help Identifying Component on Razer Mouse

    I have a Razer Naga 2012 mouse that stopped working and so I opened it up to try to figure out the issue (I've done this with a few other of my Razer Naga 2012s and have succesfully repaired them) This one stumped me and after going over it again and again I realized that the motherboard was missing a component.

    There are no identifying marks on the component itself, but next to it on the board it says "L3" Anyone have any ideas on what this component might be or how I can figure out what it might be? Going to try to find a replacement and solder it in myself. Wish me luck!
    Attached Files
  • modoran
    New Member
    • Aug 2017
    • 1
    • Romania

    #2
    Re: Need Help Identifying Component on Razer Mouse

    A coil. Replace it first with a wire, see if it works.

    Comment

    • oringmonkey
      New Member
      • May 2023
      • 5
      • USA

      #3
      Re: Need Help Identifying Component on Razer Mouse

      Originally posted by modoran
      A coil. Replace it first with a wire, see if it works.
      Wow, it worked :p Now the search starts for that coil, unless I'm able to just bridge the connection with solder and move on with my life lol. Thanks for the input modoran!

      Comment

      • ktmmotocross
        Boardkiller
        • Feb 2014
        • 3610
        • slovakia

        #4
        Re: Need Help Identifying Component on Razer Mouse

        coil is just for voltage filtration. u can use literally any coil that fits

        Comment

        • oringmonkey
          New Member
          • May 2023
          • 5
          • USA

          #5
          Re: Need Help Identifying Component on Razer Mouse

          Originally posted by ktmmotocross
          coil is just for voltage filtration. u can use literally any coil that fits
          Good to know! Thanks everyone for the input. Been doing a lot of googling and reading.

          Comment

          • piernov
            Super Moderator
            • Jan 2016
            • 4437
            • France

            #6
            Re: Need Help Identifying Component on Razer Mouse

            Most likely an SMD ferrite bead on the 5V input, it filters out high frequency noise. May not be critical in this specific case, and since the current should be low anything will probably do.
            OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

            Comment

            • oringmonkey
              New Member
              • May 2023
              • 5
              • USA

              #7
              Re: Need Help Identifying Component on Razer Mouse

              Originally posted by piernov
              Most likely an SMD ferrite bead on the 5V input, it filters out high frequency noise. May not be critical in this specific case, and since the current should be low anything will probably do.


              I ended up just soldering a bridge and have been using the mouse all day with no issues...yet...

              Comment

              Related Topics

              Collapse

              • kjchatman
                identifying sot23 on backlight cirucuit of 17" razer rz09-0423
                by kjchatman
                this laptop was damaged by a roof leak at the repair shop that it was at while waiting for a replacement cpu fan. It was given to me to try to save the motherboard which wouldn't power up anymore. The only issue now is that an sot23 marked R1 is missing one of it's three legs. I cannot find schematics for this model but I found a mosfet that has the same label but i'm not sure if it's an actual match. CJ3401 is the one that I found but I have no clue about the true identity of the damaged one.
                07-28-2025, 11:47 AM
              • Document Archive
                Acer TravelMate P215-52-56G5+15.6" Bag&Mouse Notebook P2 Specification for Upgrade or Repair
                by Document Archive
                This specification for the Acer TravelMate P215-52-56G5+15.6" Bag&Mouse Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P215-52-56G5+15.6" Bag&Mouse boardview and P215-52-56G5+15.6" Bag&Mouse schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                09-06-2024, 07:20 PM
              • Document Archive
                Acer TravelMate P214-52-566U+15.6" Bag&Mouse Notebook P2 Specification for Upgrade or Repair
                by Document Archive
                This specification for the Acer TravelMate P214-52-566U+15.6" Bag&Mouse Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P214-52-566U+15.6" Bag&Mouse boardview and P214-52-566U+15.6" Bag&Mouse schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                09-06-2024, 07:20 PM
              • Document Archive
                Acer TravelMate P214-52-54NA+15.6" Bag&Mouse Notebook P2 Specification for Upgrade or Repair
                by Document Archive
                This specification for the Acer TravelMate P214-52-54NA+15.6" Bag&Mouse Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P214-52-54NA+15.6" Bag&Mouse boardview and P214-52-54NA+15.6" Bag&Mouse schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                09-06-2024, 07:20 PM
              • Document Archive
                HP EliteBook 840 G6 + Elite Presenter Mouse Notebook 800 Specification for Upgrade or Repair
                by Document Archive
                This specification for the HP EliteBook 840 G6 + Elite Presenter Mouse Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G6 + Elite Presenter Mouse boardview and 840 G6 + Elite Presenter Mouse schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
                09-06-2024, 05:00 PM
              • Loading...
              • No more items.
              Working...