this laptop was damaged by a roof leak at the repair shop that it was at while waiting for a replacement cpu fan. It was given to me to try to save the motherboard which wouldn't power up anymore. The only issue now is that an sot23 marked R1 is missing one of it's three legs. I cannot find schematics for this model but I found a mosfet that has the same label but i'm not sure if it's an actual match. CJ3401 is the one that I found but I have no clue about the true identity of the damaged one.
-
-
Post a pic of the SOT23 in question. Highlight the top markings with IPA and then take a good pic. -
can't get the camera to focus on tiny objects but it's an sot23 with R1 as the top marking. CJ3401 is an sot23 also with R1 as the top marking but not sure if it's a matchComment
-
Maybe you can still probe the broken leg tip on the SOT-23 body? Consider to measure it in resistance mode and compare it to the CJ3401 measurements to confirm. For this, you must source the CJ3401.Comment
-
Product Name: Razer Blade 15 (2022)
Product ID: RZ09-0421
Motherboard: CH580
BIOS Versions I work with: 2.02 & 2.06
Bios File Size: 32,768 KB
Dear Forum Readers!
I'm looking for a BIOS modder or anyone with experience who would give me suggestions about my razer blade's BIOS settings.
I can view and edit the content of the BIOS .bin file with AMIBCP BIOS editor.
The BIOS files I'm working with are from badcaps.net and those are CLEAN BIOS files (anyone can find it with the search string: RZ09-0421).
!!! MY RAZER BLADE...11-24-2025, 05:52 PM -
Hi all,
Looking for a clean BIOS dump for a Razer Blade Pro 17 FHD (RZ09-0220, 2017). Unit was bricked by power transients during a tropical storm shutdown in Hawaii. Razer has EOL'd this product and won't provide BIOS support.
Details:
- Model: Razer Blade Pro 17 FHD
- Part number: RZ09-0220
- Year: 2017
- Flash chip: Winbond W25Q128 (assumed)
- Cause: power transient on shutdown — dead on next boot
CH341A programmer + SOIC8 clip on the way. Happy to dump and share my chip back to the community once recovered — that's... -
I have a Razer Blade 15 Advanced from 2020 model number RZ09-03304F42 that doesn't turn on, no led light and no charging. When I supply 19v the amperage goes to 6 amps for less than a second, and then drops to 0.5 amps for 1 second and drops once again to 0.1 amps, I checked the coils and they all give 0V, or some 0.4v. The power supply is working, and 19V enter the charging port, I followed its trace and it goes to a mosfet, which receives 19.5v at source, and 17.5v at gate, and goes to the other side of the board, but the coil there's 0V for some reason. What I have found is that the 8mb bios...03-21-2026, 11:31 AM
-
Hello.
Im looking for information about missing component on Razer Motherboard. I didnt found boardview or schematic. Anybody can help me?
RAZER RZ09 - 02385e92
C1_MB PVT V3.0...02-24-2026, 09:02 AM -
Hello, a client left a IP Video intercom indoor station, said it smelled. There is burnt SOT23-6 IC since it's HikVision I highly suspect local chineese production or their entirely in a whole IC. I could tell him that he can buy new one but let's try maybe, someone has a hint. I have checked various SMD catalogues but marking 33=M1P is not existing, searching by 33 or M1P of course gives me chips but none of them could be applied here, there is now way to put SOT23-3 diode in there.
Attachment below, device model is DS-KH6320-WTE1.
Comment