msi rx580 - GPU got a too high voltage 1,45v

[conghuyms]

GPU got a too high voltage (over 1.45V) - msi rx580-8g
works for 10 seconds ---> dump
pls help me . thanks very much

[ductranvinh]

Re: msi rx580 - GPU got a too high voltage 1,45v

coi lại con ic lớn RT. con nguồn nhỏ 0.9 có áp chưa. ko dc nữa thì tháo con apw8713 hay con gs9230-gs9238 ra r câu thẳng 1.1v vào từ máy cấp dòng xem ăn bao nhiêu ampe.
review the big ic RT. small source 0.9 has no voltage yet. If not, then unplug the apw8713 or the gs9230-gs9238 to get 1.1v straight from the line feeder to see how many amps it takes.

[conghuyms]

Re: msi rx580 - GPU got a too high voltage 1,45v

Hey bro. I'm a newbie without a job,
Up until now, I went to school but the teacher only taught this line of vga or the error of this ic and that ic and then replaced it without specific instructions. bjo I have a question with the line vga rx 470->rx580 in order to check the source, for example rx580 msi lost all power, vram, vcore ,0.9v , 1.8v.
I don't know where to start checking because I don't know which source comes first and which comes after. Can you spare a little time please, can you tell me? thank you so much

[vcaina]

Re: msi rx580 - GPU got a too high voltage 1,45v

Hey bro. I'm a newbie without a job,
Up until now, I went to school but the teacher only taught this line of vga or the error of this ic and that ic and then replaced it without specific instructions. bjo I have a question with the line vga rx 470->rx580 in order to check the source, for example rx580 msi lost all power, vram, vcore ,0.9v , 1.8v.
I don't know where to start checking because I don't know which source comes first and which comes after. Can you spare a little time please, can you tell me? thank you so much

Hi Mate! I'm also a newbie who is constantly searching for more knowledge. Here's a screenshot of the power rail for that series of GPUs. I got this from the youtube video "The GPU REPAIR GUIDE. How to fix GPU /Graphics card not detected. AMD Radeon or Nvidia", it's a good watch, check that out.



I know once your turn on, 12v, 3.3v, and 5v should also turn on. Once these rails are online, you'll get 1.8, pex and vmem and vcore so I believe those are the pre-requisistes, please correct me if i'm wrong everyone.

[conghuyms]

Re: msi rx580 - GPU got a too high voltage 1,45v

Hi Mate! I'm also a newbie who is constantly searching for more knowledge. Here's a screenshot of the power rail for that series of GPUs. I got this from the youtube video "The GPU REPAIR GUIDE. How to fix GPU /Graphics card not detected. AMD Radeon or Nvidia", it's a good watch, check that out.



I know once your turn on, 12v, 3.3v, and 5v should also turn on. Once these rails are online, you'll get 1.8, pex and vmem and vcore so I believe those are the pre-requisistes, please correct me if i'm wrong everyone.

thank yoy verymuch